Heater fan for Lada Granta

Operations carried out when removing the heater fan (stove) of the Lada Granta interior

1. Disconnect the wire from the negative terminal of the battery. 2. Open the glove compartment lid

3. Press down on the two stops.

4. . and open the box lid.

5. Pull the cover up and away from the brackets on the panel

6. Disconnect the wiring harness block from the fan motor terminals.

7. Remove the three mounting screws.

8. . and remove the Lada Granta stove fan from the air blower housing.

9. Install the fan in the reverse order of removal.

Replacing the Lada Kalina fan at home - step-by-step instructions

2. Next, open the glove compartment and, pressing the two stops, open the glove compartment lid. Remove the cover by pulling it up.

9. From the right end of the panel you only need to remove the cover; you do not need to unscrew the two bolts at “13”. Afterwards, we pull the panel towards the seat and find the fan. It is quite difficult to get the fan, and in order to do this you need to cut out a piece of felt sound insulation.

I have everything, I hope I helped you solve your problems. I think it’s described and shown more than clearly, and you won’t have any problems during disassembly. Thank you for your attention and see you again at vaz-remont.ru.

Removal of the fan (supercharger) of the heater stove on a Lada Granta car is carried out in the event of its failure for subsequent either complete replacement with a new (working) one, or for disassembly and repair in order to replace worn parts. To perform repair work you will need a standard set of tools. Perform the following sequence of actions, having first de-energized the car and disconnected the minus terminal from the battery:

Open the glove box lid and, pressing the two plastic latches, tilt it back.

Pull the cover up and remove it from the brackets on the panel.
Disconnect the block with the power wires from the heater heater motor.

We unscrew the three screws securing the fan and remove it from the air blower housing.
Make the necessary repairs, then install in the reverse order.

At this point, the repair work to remove the heater fan on the VAZ 2190 has been completed.

In 2011, the Volzhsky Automobile Plant introduced a new model of a passenger car, which was positioned as a cheap people's car. At first, the VAZ-2190 was presented in a sedan version, and in 2013 a hatchback was released, which, in addition to the body, had a slightly different basic and top-end configuration.

Inspection and testing of the heater fan motor (stove) Lada Granta

The functionality of the stove fan can be checked by applying 12 volts to the power terminals. If you notice any extraneous noise, first check the condition of the heater impeller. The blades must be of the correct shape, clean, without any inclusions (debris, leaves, etc.). If increased fan noise is still present despite the absence of the above-described deviations, then most likely the bearing in the fan motor is faulty. In this case, you will have to replace the fan motor or the entire assembly.

Troubleshooting

If the heater on your car stops working, you need to check the serviceability of not only the heater itself, but also all other devices included in the heating and cooling system. The failure of any link provokes a failure of the entire system or its individual part. Experienced car owners recommend not to wait for a problem to arise, but to periodically arrange preventive examinations for your “iron friend”, then you can prevent undesirable consequences.

If the stove begins to supply only cold air into the cabin, the following may be the trigger:

insufficient coolant level;
poor thermostat performance;
the damper does not close completely;
a broken fan;
burnt fuses or resistor.

It is for this reason that it is useful to have your entire heating and cooling system inspected.

Lada Granta 2349 2011 – 2021

Lada Granta heater motor guarantees the reliability, controllability, mobility and safety of your car on the roads. Original and branded spare parts are always available in warehouses at reasonable prices.

However, speaking of repairs, even more important for driving safety is regular maintenance and timely repairs, subject to vehicle maintenance regulations:

works well,
does not lose its performance over long runs,
more reliable and safer to operate

We make it easy to keep your car in good condition and provide great deals on our entire range of parts. Everything you need for service and repair can be found right here in our digital warehouses. Instead of endlessly searching for a retail auto parts store near you that doesn't necessarily have the parts you need, just pick up the phone and we'll deliver the auto parts you need to your door.

The main emphasis when selecting spare parts is based on the company’s experience.

It is profitable and safe to buy from us for a number of main reasons:

Autocompas.ru is one of the leading online stores of auto parts, with daily traffic on the site of more than 30,000 people,
Certified and reliable suppliers provide a full range of auto parts within access to their warehouses,
The system has more than 500 suppliers and manufacturers who regulate prices with an eye on competitors and strive to make their goods more profitable to purchase.

Why look for the Lada Granta heater motor somewhere else, wasting time? We have competent staff, payment, delivery and support services.

Cooling

To cool the interior air, do the following:

Switch switch 1 (see Fig. 2) of the electric fan operating modes to one of the positions “1”, “2”, “3” or “4”.
Place the regulator handle 4 opposite the pictogram.
In the 3 pushbutton switch block, press the air conditioner switch key. The indicator located on the switch button will light green all the time the air conditioner is operating.

When the air passing through the evaporator cools, the water vapor contained in it condenses. The condensate is drained through a drain pipe under the bottom of the car. If the ambient air humidity is high, a puddle of water may form under the car, which is an indirect sign that the air conditioning system is working properly.

Turning on the air conditioner while the engine is running under difficult conditions (long climbs, heavy city traffic, etc.) can lead to engine overheating. Monitor the coolant temperature gauge: if the temperature exceeds the permissible value, turn off the air conditioner.

climate block grants
air duct grants
air conditioning grants
stove grants

Lada Granta is one of the most popular cars in Russia in 2021, along with KIA Rio, VW Polo, Lada Vesta, Hyundai Solaris and Hyundai Creta. This popularity of the car is explained, first of all, by the optimal combination of price and quality: Granta owners note good visibility, an acceptable power unit, ease of maintenance, low cost of spare parts, a spacious trunk, high ground clearance, which is extremely important for Russian realities.

New Lada: New VAZ-21127 engine - discussion on the “Russian Cars” forum on

Among the components that are indispensable in the cold season is a heater, the main component of which is the radiator. If a situation arises when it is necessary to replace the stove radiator, then in most cases this can be done without outside help. What should the owner of a Lada Granta remember who has decided to replace the heater radiator on his own?

Parts and consumables:

Oil filter
Engine oil
Rags

Open-end wrench 10 mm
Ratchet wrench
Extension
8 mm head
10 mm head
13 mm head
21 mm head
Torx T20 socket
Medium Phillips screwdriver
Large flat screwdriver

Technical capacity
Coolant 8 l
Heater fan housing (if required)
Heater housing (if necessary)

Reviews

№	Positive
1.	Vladimir: Six months have passed since we bought the car, and there have been no breakdowns in such a short time. The fan refused to start several times, the reason turned out to be a bad fuse contact.
2.	Vasily: I have been actively using the machine for two years, there are no particular complaints, all units are working as normal. Breakdowns happen, like everyone else, but they are minor and can be easily fixed on your own.
3.	Gennady: after two months of the machine being idle, the stove heater began to supply little air. I disassembled it myself, cleaned it, works properly. My recommendations to car enthusiasts: don’t be afraid to repair them yourself.
4.	Kirill: I think that Granta is put together with high quality, the price is affordable for a family with an average income. Provided timely maintenance, no problems arise.
5.	Ivan: after buying the car, I immediately drained the factory antifreeze and bought good imported antifreeze. Now I don’t know any grief, the stove works like a charm.
6.	Dmitry: there were minor defects, I fixed them myself, but they were insignificant and did not affect the performance of the machine.
7.	Igor: I’m happy with the car, there are no major comments, as for domestic transport it’s very good.
Negative
1.	Victor: Over the two years of active use of the car, I contacted the service station several times under warranty. The fan malfunctioned, then the stove heater. Decided to renovate and sell. Renault Logan is several times better than its domestic counterpart.
2.	Vladlen: I’m dissatisfied with Grant’s purchase, I’ve already regretted wasting money several times. The car is not worth the investment.
3.	Gennady: a year and a half since purchasing the car, constant investments, purchase of consumables, repairs at service stations.

Conclusion The stove heating system of the Lada Granta is completely copied from the Lada Kalina. There are no complaints about the equipment, everything works properly. In order for the mechanism to serve for a long time, it is necessary to systematically carry out inspection and prevention.

Many motorists save on maintenance, as a result of which the service life is reduced. An important factor is the cloudiness of the antifreeze. The manufacturer recommends replacing it every 75,000 km. Exceeding the interval causes deposits to form at the bottom of the radiator and corrosion begins.

2. To remove the heater fan housing, use a Phillips screwdriver to unscrew the self-tapping screw of the lower housing fastening.

3. Using the same tool, unscrew the self-tapping screw of the upper right (see first photo) and the self-tapping screw of the upper left (see second photo) fastenings of the housing.

4. Lifting the fan housing, press the clamps of the wire blocks one by one and disconnect the blocks from the heater fan and the additional fan resistor.

5. Remove the heater fan housing from the instrument panel frame.

6. To remove the heater housing, use a Phillips screwdriver to unscrew the upper right screw (see first photo) and the upper left screw (see second photo) of the housing fastenings.

7. Using the same tool, unscrew the self-tapping screw of the lower left (see first photo) and lower right (see second photo) fastenings of the heater housing.

8. Remove the heater housing from the instrument panel frame.

9. Reinstall the heater fan housing and heater housing in reverse order, as well as all other removed parts.

The stove heating system on the Lada Granta car functions quite well, the owners have no complaints. The stove radiator is reliable and durable. However, there comes a time when the process of metal corrosion begins and the seams peel off. A faulty heating system can cause a lot of trouble, especially in sub-zero temperatures.

Frosting of windows and cold inside the cabin are the first symptoms of unstable operation of the heating system. Prevention is necessary.

Let's look at the step-by-step process of replacing the heater radiator on a Lada Granta car.

Coupons for comments!

We would like to thank you for your comment! Choose one of 3 coupons. The message is shown once a day - don't miss your chance!

If the fan motor that supplies air to the interior of a Lada Granta car fails, it is necessary to inspect the electric fan and make a conclusion about repair or replacement. This article will provide information on removing the interior heater (stove) fan for a Lada Granta car. It is worth saying that the fan, compared to previous models of VAZ cars, is installed quite conveniently for its dismantling and installation.

You will need: flat-blade and Phillips-blade screwdrivers.

1. Disconnect the wire from the negative terminal of the battery.

2. Open the glove compartment lid

3. Press down on the two stops.

4. . and open the box lid.

5. Pull the cover up and away from the brackets on the panel

6. Disconnect the wiring harness block from the fan motor terminals.

7. Remove the three mounting screws.

8. . and remove the Lada Granta stove fan from the air blower housing.

9. Install the fan in the reverse order of removal.

Repair manual Land Cruiser Prado 120, 150

Installation and repair of Lada Granta

How does a stove fan work?

The main task of the fan is to take air flow from the outside and deliver it to the deflectors.

The fan is activated by a mechanical button, to which a 12 V power supply is supplied. In the Lada Granta version, the fan operates at one of three speeds. The driver selects the most optimal mode depending on the temperature inside the cabin.

Additional resistors Grants

Without resistors, the fan operates at one speed with a stable rpm. There are a total of 3 resistors installed on the board.

When the lever is moved to the first position (three resistors), the fan rotates at the first speed, the very minimum. Transfer to the second position - second speed (two resistors). Transfer to third - third speed (one resistor). The detailed diagram of the stove is shown in the photo.

Air distributor flap

Installed to regulate the air flow coming from the fan to the glass for blowing through air ducts.

Often, deformation and bending of the plastic body under the influence of temperature leads to flow leakage and depressurization.

Temperature control flap

Regulates the supply of warm air flow from the stove heater to the car interior. The wider the damper is open, the greater the throughput of the “channel”, and vice versa, the narrower it is, the less.

Heat exchanger Grants

Its main purpose is to heat the air flow entering the cabin. The heat exchanger is connected to the power unit through two rubber pipes: supply and return for fluid circulation.

The standard location is the central part of the dashboard of the car interior.

Air temperature sensor inside the car

Structurally installed inside a plastic interior lighting lamp. To avoid overheating, the sensor is equipped with a forced airflow system.

The installation is designed so as not to distort the actual temperature readings.

Pipes

Rubber pipes Rubber pipes literally permeated the entire cooling, stove heating, and air conditioning system. Without their help, it is impossible to connect sections of highways with each other. Fixation method: with clamps, metal ties.

Lada Granta heater fan does not work