Electrical package control unit standard 1118-3763040 for LADA Kalina

Auto manufacturers today use many technological solutions to ensure more comfortable driving. One of such devices is CBKE. What is the central unit of body electronics Kalina 2 needed for, what functions does it perform and what malfunctions are typical for it - read in this article.

Description of CBKE

Unlike the first Kalin models, the second versions and Luxury equipment use an electrical package control unit instead of traditional relays to control the electronics. This device combines many functions, we suggest you familiarize yourself with them in more detail.

Connection diagram of elements and outputs of the CBEK

Functions

The electrical package control unit is designed to perform the following functions:

1. Alarm. If the car's anti-theft system detects a break-in attempt, thanks to the CBKE, it will transmit information about this to the car owner's control panel.
2. Windshield wiper system control. Moreover, we are talking about both manual and automatic control (if the car is equipped with an electrical package control unit marked 21900-3840080-20).
3. The device performs the function of controlling the windshield and rear window heating systems. This unit also controls the heating elements of the side rear-view mirrors.
4. The electrical control unit also monitors the performance of the optics, both in manual and automatic control modes. In particular, we are talking about low-beam headlamps, side lights, and DRLs.
5. Separately, we should highlight the function of ensuring the functionality of the high-range lighting.
6. Turning lights, as well as light signaling.
7. Vehicle interior lighting.
8. The device monitors the performance and energy saving of devices belonging to the category of internal lighting of the car.
9. Monitoring the state of the central lock, as well as performing the functions of locking and unlocking the locks themselves from the key, from buttons installed in the car interior, as well as in the doors.
10. Another option is to open the luggage compartment lid using a button installed in the cabin.
11. An equally important function is the control of electric drives, in particular, we are talking about power windows, as well as side rear-view mirrors.
12. Heating system for driver and passenger seats.
13. Luggage compartment lighting unit (video author - Vladimir Kostyuchenkov).

Typical faults

If the electrical package control unit fails for some reason, this can lead to the following problems:

1. Failure to operate power windows. Of course, before disassembling the control module, you should make sure that the window regulators do not work precisely because of it. It would be logical to first check the safety element, as well as the lift control unit, which is built into the driver's door. In practice, it often happens that the cause of power window failure is poor wiring contact on the unit itself.
2. The optics stopped working - low beam, turn signals, etc. In this case, the safety elements, light sources and steering switch are first checked. There is a possibility that the reason lies in a broken contact directly on the switch; if this is the case, then they should be re-soldered. If the reason is that the unit is not working, it will need to be dismantled and disassembled in order to find the burnt-out element and re-solder it. If soldering does not help solve the problem, the device will have to be replaced.
3. Some of the equipment has stopped working, while the devices, as at first glance may seem, are in no way connected with each other. The fact is that the module itself includes many elements and controllers, each of them is responsible for performing certain functions. If two or more controllers fail at once, it can cause serious damage. For example, the optics, heated rear and front windows, the trunk door and the window regulator will immediately refuse to work. It is necessary to locate the failed controller and replace it by re-soldering.
4. A fairly common problem that can occur is a break in the wiring of the unit. It is installed in a virtually inaccessible place, but if electrical work is being done, for example, installing an anti-theft system, then most likely the car owner will encounter a TsBKE. And if the wiring is damaged during the work, of course, this will affect the functioning of the device and, accordingly, the performance of certain functions.
5. Oxidation of contacts on module connectors. If you encounter such a problem, we recommend paying attention to the humidity in the cabin. Often, oxidation at the outlets occurs precisely as a result of high humidity. The contacts can be cleaned, this is not a problem, but the problem of humidity must be addressed, since otherwise it can lead to failure of the microcircuit as a whole.
6. Board failure. The most terrible problem for the car owner, because because of this the device simply will not be able to work normally. Accordingly, it will need to be replaced, and this, in turn, costs a lot of money (author - Alexander Fisher).

Personalize existing features

The manufacturer has provided for the timing of regular technical inspections, which are mandatory. For non-compliance, the company reserves the opportunity to deprive the car owner of the right to free service.

The most vulnerable is the comfort block, which includes many logical circuits. Its purpose boils down to the following functions:

• activation of interior lighting;
• adjusting the operation of car alarms;
• turning on the heated rear window;
• automatic mirror adjustment;
• control of electric windows;
• remote control of locks.

The manufacturer has provided the ability to personalize each element. To do this, the electrical package control unit must be recoded at an authorized automotive center. Using official software, the wizard will add or remove certain features. If everything is done correctly, 20 minutes after requesting the appropriate service, you can safely use the “iron horse”.

According to reviews from car enthusiasts, the Lada Kalina car is distinguished by electronic filling with increased sensitivity to operating conditions. Aggressive driving style and minor damage lead to malfunctions.

As a result, you need to visit a service station to replace the device. To do this, remove the control unit, which must be done as follows:

• turn off the battery;
• unscrew the screws from the driver's seat;
• Use a ratchet wrench to remove the nut;
• the plastic plug is squeezed out completely;
• carefully pull out the seat;
• remove the seat by dismantling the terminals;
• remove the cover plate.

The replacement procedure on the Kalina 2 model is completed by folding the carpet and installing a new block. After this, all procedures are carried out in reverse order.

Replacement features

Briefly about the procedure for replacing the control module on Kalina 2:

1. First, the instruments are dismantled from the center console; there is nothing difficult about it.
2. Then the lower part of the center console trim is unscrewed, the trim is removed, and you gain access to the fuse and relay box.
3. The mounting block with safety devices can be unscrewed, but it cannot be removed because it is connected by wires. You can rotate it a little so that it takes a horizontal position.
4. You can stick your hand into the gap formed as a result of turning. Having done this, you will be able to feel the shelf on which the TsBKE is installed. A little to the left there is a bolt with which this module is fixed - you need to unscrew it.
5. After this, through the top, through the instrument panel, you will need to disconnect the two connected connectors. After completing these steps, you can carefully dismantle the CBKE and remove it by slightly moving the fuse box. Please note that you should not pull the device too hard, since there are two more connectors on the other side that will need to be disconnected. When the wires are disconnected, the CBKE can be completely dismantled and repaired or replaced.

Photo gallery “Assistance in replacing CBKE”

Price issue

The cost of CBKE will vary depending on the modification. On average, such devices cost from 4,500 to 6,000 rubles.

Video “Independent repair of the control module”

How to properly dismantle the CBKE and how to subsequently repair it - detailed instructions describing all the nuances are presented in the video below (author - MultiAlexander9).

The electrical circuits of modern LADA cars are very different from previous AvtoVAZ models. Some of the relays have disappeared and instead they are replaced by an electrical package control unit (comfort unit), which is responsible for the operation of the ESP, central locking, turn relays, turn signals, etc.). Lada Vesta and XRAY use a similar TsBKE module (central body electronics unit).

Non-specific types of services

Even if the rules for safe operation of the vehicle are observed, the heater control unit may require servicing or replacement. This happens as a result of sudden switching of the heating knob of the Lada Kalina car. The operating instructions indicate that you must wait until the system warms up to a minimum, otherwise expensive repairs will be required.

From a financial point of view, the stove control unit will not be cheap, so its careful operation will save the family budget.

The heater control unit cannot be replaced independently due to the need to use special equipment. Much less often problems arise at the level of the engine control system.

The need to visit a service station will be caused by driving on a gravel road, an accident, or the result of unprofessional maintenance. The engine management system is responsible for fuel injection, so any deviations in its operation immediately put the car on hold. How long it will take to replace the engine control unit will be decided by the technician after an inspection.

It is cheaper, but repairs take much longer when the body electronics unit comes under attack. The problem can only be diagnosed in a service center. The duration is due to the fact that if the engine control unit can be replaced as a single whole, then part of the wiring must be changed along with the electronics.

Voltage surges or a simple short circuit can damage a certain sector. The light control unit will be the first to tell you about this.

Incorrectly working turn signals or emergency lights are the first sign indicating a failure in the electronic component of the car. There is no point in delaying a visit to the service center. Otherwise, the ESP unit responsible for dynamic stabilization will come under attack. Even with minor problems, the driver will notice a decrease in the lateral dynamics of the vehicle.

Lada Kalina requires regular maintenance as prescribed by the manufacturer. If the specified deadlines are met, each element of the system will work properly.

Purpose and description

The central body electronics unit (CBEC) came from Renault and is located under the panel behind the glove box. The block is designed to perform the following functions:

• Access control system functions;
• Starter control;
• Control of relays of additional consumers;
• Control of the rear window heater and electric side mirror heaters;
• Windshield defroster control;
• Control of direction indicator and hazard warning lamps;
• Interior lighting control;
• Control of door sill lamps (for the “Lux” package);
• Trunk lighting control;
• Windshield wiper control (for “Classic” and “Comfort” trim levels);
• Energy saving control of vehicle interior lighting devices;
• Monitoring the state of the brake signal switch (BST);
• Monitoring the state of the clutch pedal position signal switch (CPPS) (for configurations with a manual transmission);
• Indication.

CBKE schemes

Electrical connection diagram for TsBKE on LADA VESTA: 2 – rechargeable battery; 3 – starter; 4 – rear left outer lamp; 5 – left headlight; 7 – rear window heating relay (K3); 8 – right headlight; 10 – rear outer right lamp; 13 – trunk light; 15 – fuse 60 A (F70); 16 – additional relay (K8); 17 – ignition switch; 26 – alarm switch; 30 – fuse 5 A (F20); 32 – left steering column switch (light alarm switch); 34 – fuse 60 A (F75); 35 – rear window heater; 44 – windshield heating relay 1 (K21); 46 – windshield heater; 47 – lampshade lighting of the glove box; 48 – switch for the glove compartment lamp; 51 – TsBKE (VSM controller); 58 – fuse 30 A (F61); 59 – left threshold lamp (installed on luxury equipment); 60 – right threshold lighting lamp (installed on the “luxury” configuration); 61 – relay of additional consumers (K2); 63 – fuse 10 A (F32); 84 – fuse 3 A (F43); 87 – left outside mirror; 88 – right outside mirror; 120 – additional starter relay (K23); 134 – brake signal switch; 138 – fuse 5 A (F15); 164 – air conditioner control panel (connection diagram for the “comfort” package); 185 – interior lighting unit with ERA-GLONASS interface module; 196 – fuse 5 A (F24); 200 – fuse 15 A (F11); 201 – fuse 15 A (F12); 202 – fuse 10 A (F13); 203 – fuse 10 A (F14); 204 – fuse 5 A (F17); 205 – fuse 5 A (F16); 229 – fuse 3 A (F49); 230 – clutch pedal position signal switch; 231 – windshield heating relay 2 (K22); 233 – fuse 5 A (F80)

• location of fuses F1-F59 and relays K1-K20 in the interior mounting block;
• location of fuses F60-F80 and relays K21-K28 in the motor mounting block

Basket

Double-glazed window control unit “Norma” 1118 – 6512010 for VAZ 11183 “Kalina”

©Aktuator On cars of the Kalina family, 2 types of non-interchangeable (by wiring) glass control controller 1118 - 6512010 and 11180 - 3763040 can be installed. 1118 – 6512010 has one 25-pin connection connector, 1118 – 3763040 (1118 – 3763040 – 10) – two connectors.

Read also: Aveo T300 spare parts catalog

Remote control system for double-glazed windows “norm” on a VAZ 11183, Kalina. Controls power windows and central door locking. When the connector is removed, the engine does not start; the device performs some of the anti-theft functions.

Connection

* A regular shock sensor from any alarm system (Alligator, Saturn, Clifford, APS) is suitable.

+ 12 V connect to pin 12; body – on the 6th; We connect the signal wire (a ground appears on it at the moment of activity) to the 1st contact.

During normal arming, Kalina now reacts to an impact on the body (it sounds a horn and blinks turn signals). Similarly, instead of a shock sensor, you can connect a volume sensor (for example, single-level MMS‑1).

You can also connect a pager: + 12 V of the pager transmitter on pin 12, minus on pin 21.

Double-glazed window control unit 1118 – 3763040 (- 10 ) for VAZ 11183 “Kalina”

Sign

1 . 1 Malfunction in the VZ communication coil circuit

1 . 2 Malfunction in the circuit from the block to the communication coil to the APS ECU

1 . 3 Transponder missing in OK

1 . 4 The transponder in OK is faulty (detected during pre-production preparation)

1 . 5 The transponder in the Republic of Kazakhstan is faulty (detected during pre-production preparation)

1 . 6 Malfunction of the input transponder circuit in the APS ECU

1 . 8 The communication coil came off from the VZ pad on the inside

Read also: How much does it cost to register a car with the traffic police?

2. 2 Malfunction of W‑Line circuits in the APS or ICS units

2. 3 Lack of supply voltage on the APS or KSUD unit

2. 4 The “Normal” electrical package is faulty (the control driver has burned out)

2. 5 KSUD does not contact