Instructions and manual for Scher-Khan Logicar in Russian

Author: Victor

According to the instructions, Sherkhan Magikar A is a car alarm with the ability to be controlled via a radio channel using a key fob communicator with a liquid crystal display. The device is designed to work on gasoline or diesel vehicles with a fuel injection system and 12V on-board voltage.

[Hide]

Operation Manual Alarm System…

Page 2

• Image
• Text

2

Manual

Vehicle alarm system STSTS

SCHER-KHAN LOGICAR 1

(hereinafter referred to as the system) corresponds

mandatory requirements in the GOST R certification system,

requirements for car security devices: GOST R 41.97-99 (Uniform regulations regarding official

approval of vehicle alarm systems

(STSTS) and motor vehicles in relation to their systems

alarm system (STS)) GOST R 50009-2000 (Electromagnetic compatibility of technical equipment.

Technical means of security alarm. Requirements and Methods

tests) Thank you for purchasing a two-way car security system

systems SCHER-KHAN LOGICAR 1

Our company's continuous research and development embodies

the most advanced ideas and serve to satisfy all needs

users of our systems. System SCHER-KHAN LOGICAR 1

is a complex electronic

vehicle equipment. From its functioning and correct

installation depends on the safety of your life, health and road

situation, the quality of work of nearby radio-electronic

equipment and communications. Trust the installation of the system only

specialized service stations. During operation

Periodically check that the system is functioning correctly.

attention!

When purchasing, check that the warranty card is filled out correctly.

The manufacturer and system supplier are not responsible

for any disregard of the installation manuals and

operation, as well as for errors made during installation.

If problems arise with the operation of the system,

please contact the service center immediately for

diagnostics or consultation.

The manufacturer reserves the right to make changes to the system design

in order to improve consumer properties

Video

User Vlad Samara SHF showed in his video what kind of malfunction the owner of the Magikar A alarm system might encounter.

Do you have any questions? Specialists and readers of the AUTODVIG website will help you ask a question

Was this article helpful?

Thank you for your opinion!

The article was useful. Please share the information with your friends.

Yes (100.00%)

No

X

Please write what is wrong and leave recommendations on the article

Cancel reply

Rate this article: ( 3 votes, average: 4.00 out of 5)

Discuss the article:

is a car alarm with the ability to control...

Page 3

• Image
• Text

3

Sсher-Khan logicar 1

PURPOSE Scher-Khan logicar 1

System SCHER-KHAN LOGICAR 1

is an automobile

alarm with the ability to control via radio channel via

key fob communicator with liquid crystal display. System

exchanges information between the key fob communicator and

processor unit at a distance of up to 1,000 m. IN SCHER-KHAN LOGICAR 1

there is a function to automatically start the engine upon commands

key fob or internal timer. Car alarm is designed

for use on petrol or diesel vehicles with the system

fuel injection and on-board voltage 12 V, with mechanical or

automatic transmission. Protection of the processor unit, sensor

shock, call sensor, antenna unit is made according to the IP-40 standard and

Provides for installation inside the car. Siren made according to

IP-65 standard and can be installed in the engine compartment, away from

exhaust manifold and high-voltage systems.

content

PURPOSE OF SCHER-KHAN LOGICAR 1. ……………………………………………………………….. 3

DELIVERY SET …………………………………………………………………………………… 5

Additional components SCHER-KHAN LOGICAR 1. ……………………….. 6

LIST OF FUNCTIONS ……………………………………………………………………………………… 6

Functions of the key fob communicator……………………………………………………….. 6

Functions of the processor unit……………………………………………………………… 7

TECHNICAL SPECIFICATIONS …………………………………………………………………. 8

Types of alarm signals…………………………………………………………………………………. 8

Control methods…………………………………………………………………………………8

Protection of electrical circuits………………………………………………………………. 8

Spheres of protection………………………………………………………………………………….. 9

Other parameters…………………………………………………………………………………. 9

Batteries…………………………………………………………………………………. 9

DESCRIPTION OF KEY RINGS…………………………………………………………………………………………. 10

Symbols on the display of the key fob communicator ………………………………………… 10

Correspondence of the buttons of the main and additional key fobs…………….. 11

Purpose of key fob communicator buttons …………………………………………. 12

Setting up the key fob communicator. ………………………………………………………. 13

Turning on the display backlight……………………………………………………………….. 14

Keypad lock…………………………………………………………………………………………. 14

Advantages and disadvantages

Advantages of the Scher-Khan 5 car alarm:

• no malfunctions;
• low number of false positives;
• signal reception range;
• automatic engine start;
• long service life of the batteries in the communicator.

Equipment shortcomings noted in owner reviews:

• interruptions in operation at air temperatures below -35°C;
• there is no cellular communication unit;
• a simple encoding algorithm that can be broken by signal scanners;
• There have been cases of involuntary activation of the owner's call sensor;
• The standard siren has a low volume;
• Chinese copies are common on the market, imitating the original packaging and products.

Operating Guide Power Saving Mode Battery…

Page 4

• Image
• Text

4

Manual

Battery Save Mode…………………………………………… 14

Driving a second car……………………………………………………….. 14

Indication of the presence of a feedback signal ………………………………………….. 15

SYSTEM OPERATION…………………………………………………….. 15

Arming ………………………………………………………………………………………………. 15

Arming with the engine running…………………………………… 17

Arming in Pit-Stop mode …………………………………………………………… 19

Automatic arming …………………………………………. 22

Alarm mode………………………………………………………………………………….. 23

Reminder mode……………………………………………………………………………….. 24

Disarming…………………………………………………………………………………….. 24

Automatic return to security mode………………………………………………. 26

Searching for a car………………………………………………………………………………….. 27

Opening the trunk ……………………………………………………………………………… 27

Checking the condition…………………………………………………………………………………. 28

Panic mode or JackStop™……………………………………………………………….. 29

Turning off the siren signals……………………………………………………………….. 30

Valet mode……………………………………………………………………………………………………………. 31

Turning the shock sensor on and off…………………………………………….. 33

Central locking control by turning the ignition on/off

or by tachometer signal………………………………………………………. 35

“Turbo” mode………………………………………………………………………………………… 35

Additional channel 1 control ………………………………………………… 39

Additional channel 2 control ………………………………………………… 41

Control of additional channels 3, 4, 5 ……………………………………… 42

Remote engine start………………………………………………………….. 43

Automatic engine start backup mode…………………… 45

Diagnosis of the causes of unsuccessful automatic engine start……. 48

Setting a timer to automatically start the engine …………………… 48

Limitation of the number of automatic starts………………………………………………………50

Disarming the system without a key fob and using a personal code ..... 50

Disarming the system without a key fob using PIN……………….. 51

Engine blocking ………………………………………………………………………………………. 53

Additional lighting when arming and disarming ……………. 53

Protecting the radio channel from code interception…………………………………………………………….. 53

Adjusting the sensitivity of the shock sensor……………………………………….. 53

Peculiarities

Scher-khan Magicar 6 installers website
The main feature of all alarm systems with feedback is the receipt of operational information about the car at a distance when malicious actions are committed. Let's say someone hits a car while passing by, as a result, a signal will be sent to the alarm key fob. If the key fob is equipped with a display, then you can see what exactly happened to the car.

Most Sherkhan alarm models are equipped with feedback. Using the immobilizer, you can turn on the engine and warm up the car in the winter or turn on the air conditioning in the summer heat, which allows the driver to sit in the cabin in comfortable conditions. There is also the possibility of connecting an immobilizer crawler.

This video discusses the security functions of Sherkhan alarms (the author of the video is scherkhanalarm).

Programming the tachometer signal………………..

Page 5

• Image
• Text

5

Sсher-Khan logicar 1

Programming the tachometer signal……………………………………… 54

KEY FOB PROGRAMMING ………………………………………………………. 54

PROGRAMMING FUNCTIONS USING THE KEY FOB ………………… 55

Menu of programmable functions No. 1 ………………………………………………….. 56

Detailed description of programmable functions of menu No. 1 …………………. 59

Setting all programmable functions of menu No. 1 to factory defaults

values ​​…………………………………………………………………………………………………………… 66

Menu of programmable functions No. 2 ………………………………………………….. 66

Setting all programmable functions of menu No. 2 to factory defaults

values ​​…………………………………………………………………………………………………………… 69

contents of delivery

When purchasing a system, make sure that it is included. Specified

The scope of delivery is basic and can be expanded to include

according to the buyer's wishes with additional components.

Name

quantity

Operating manual………………………………………………………………………………… 1

Installation Guide………………………………………………………………………………… 1

System installation and configuration diagram……………………………………………………1

Processing unit SCHER-KHAN LOGICAR 1 ……………………………………….. 1

Keychain communicator………………………………………………………………………………………………. 1

Additional key fob………………………………………………………………………………….. 1

18-pin power connector with cable

and five CN 1 fuses (white CN 1 connector) ……………………………. 1

12-pin low current connector with cable

(black CN 2 connector) ……………………………………………………………………………………….. 1

LED (VALET) with cable (3-pin white connector CN 3) …………………… 1

Shock sensor with cable (4-pin red connector CN 4)……………….. 1

4-pin additional sensor wiring harness

(green CN 5 connector) ………………………………………………………………………………………………. 1

Antenna module with cable (6-pin blue connector CN 6) ……………. 1

2-pin power connector for integrated motor lock with

wires (matching connector CN 7 comes out of the block on wires)………… 1

Locking relay with block……………………………………………………………….. 1

Hood/trunk limit sensor (brown wire without connector) .... 1

Possible faults

Malfunctions and errors that may occur in the operation of a car alarm:

1. Difficulties in signal transmission. The problem may be due to a malfunction of the communicator or a low battery. The power source needs to be changed. If the problem persists, then the faulty key fob must be disassembled and the integrity of its internal components checked. Traces of dirt and moisture are removed using dry cotton wool, the device must be dried, and damaged contacts are resoldered.
2. Malfunctions in the transceiver can also lead to failures in sending signals. It is necessary to make sure that the device is installed correctly, as well as the integrity of the wire through which it is connected. If the electrical circuit is damaged, it must be replaced. Restoring the cable by twisting is not allowed - only soldering.
3. Damage to electrical circuits. To find a failed line, you will need a special tester.
4. The siren triggering for no reason may be due to incorrect settings of the sensitivity controller. To resolve this problem, this parameter must be adjusted.
5. Malfunctions in the operation of the microprocessor unit. It is almost impossible to determine a software or hardware error yourself without using diagnostic equipment. The only thing the user can do is visually check the integrity of the block connection block, and also inspect its board. The module may not operate correctly due to moisture on the internal components; to eliminate this problem, the board must be dried. If the contacts on the unit connector are damaged, the block will have to be re-soldered.

Description of key fobs

Page 10

• Image
• Text

10

Manual

attention!

Use only high-quality batteries. Usage

poor quality batteries can lead not only to

shortening the service life of the key fob, but also damaging it.

DESCRIPTION OF KEY FOCKS

PREPARING THE KEY FOB-COMMUNICATOR FOR OPERATION

Before using the key fob, remove the cover latch

battery compartment, press the cover and slide it to the side

opposite the antenna. Install the battery into the battery compartment,

observing the polarity indicated on the bottom of the battery compartment. Close and

secure the battery compartment cover. The keychain is ready for use.

symbols on the display of the key fob communicator

Indicator of operation of the key fob communicator transmitter and

presence of communication from the key fob to the processor unit Indicator of the presence of a feedback signal Low battery indicator

key fob communicator and Battery Save Mode

Time indicator, key fob battery voltage -

communicator and additional text information Valet mode indicator Security mode status indicator. Lock indicator and

unlocking locks in Valet mode Siren signal off indicator

Shock sensor disconnect indicator

Vibration call on indicator Automatic control on indicator

central locking for ignition alarm indicator

Comments

Need instructions for use
Eduard 06/16/2020 15:10 GMT

How to remove autostart Sherkhan Logicar 6i?

Masha 04/15/2021 19:19 GMT

How to remove autostart Sherkhan Logicar 6i

04/15/2021 19:25 GMT

Select → I found instructions for my car alarm here! #manualza

• Click →

Who smoked the anti-smoking instruction?

Manualza!manualza.ru

Still not with us?

Specifications

Main characteristics of the alarm system for Scher Khan cars:

• the duration of the signals when the alarm mode is turned on is 30 seconds;
• to protect the vehicle, the alarm system uses security zones - door locks, hood and trunk locks, electrical circuits of the ignition system;
• installation is possible on cars with on-board power supply from 9 to 18 volts;
• when the security mode is on, Sherkhan Magikar A consumes about 20-35 mA;
• Car alarm operation is possible at temperatures from -40 to +85 degrees;
• microprocessor unit weight - 270 grams;
• to power the main communicator you will need a 1.5 V unit, an additional 6 volt unit;
• The battery life in the main remote control is about 6 months, in the spare one - 3 years on average;
• Signal transmission is carried out at an operating frequency of 433 MHz.

Equipment

The delivery set of Majikar A includes:

• user guide;
• service documentation;
• connection diagrams;
• Sherkhan A processor unit;
• control panel with LCD display;
• additional key fob without screen;
• 4 sensors;
• transceiver;
• antenna module;
• blocking relay;
• limit switches;
• siren;
• Light-emitting diode;
• double sided tape.

Installation

Today, you can install a Magikar brand security system with auto start yourself, of course, if you have minimal plumbing skills and, most importantly, knowledge in the field of car alarms. Installation maps for any model under the Sherkhan brand can be easily found in the public domain on the Internet and, after carefully studying them, you can do everything correctly.

However, there are several points that are worth knowing, otherwise the purchased alarm system will need repair or complete replacement:

• If you confuse something, taking into account the fact that the security system has access to the car's electrician, you can safely expect a short circuit. Even if a fire is avoided, the system is guaranteed to require repair or replacement of the central control unit.
• If the alarm system is equipped with an autostart, there is a possibility that an unqualified installer will make a mistake, something with the sensors and the autostart will not work.
• And on the Internet, you can easily stumble upon the wrong ones with autostart, and then the system will not work at all, and, perhaps, will fail and will need to be repaired.

MAGICAR model settings

This car alarm model is characterized by a high level of reliability and ease of control. To avoid errors while setting up the autostart system, do not forget to turn off the engine and turn on the security mode.

Here are some useful commands executed from the key fob:

Calculate the timing of cranking the starter so that the car has time to warm up before you arrive.

All Sherkhan alarm systems are highly reliable, so all malfunctions in the settings are most often caused by the inability of car owners to use the security system. Read the operating instructions carefully to avoid any difficulties.

Automatic start of alarm system Scher-Khan magicar 5

To autostart Sherkhan 5 from the key fob, you must press and hold for at least 2 seconds button II, as shown in the figure.

Anti-theft systems are constantly being improved, protecting your car from break-ins and theft.

This is a necessary security measure even for those drivers who leave their cars in garages or paid parking lots; even they do not always save them from theft.

Thus, the Scher-Khan company offers several versions of protection systems: MOBICAR, UNIVERSE, MAGICAR, LOGICAR. All of them have the ability to configure auto-start alarms and provide a high level of protection for your car against theft.