Replacing the radiator grille on a Lada Granta

How to remove the radiator grille of a Lada Granta without removing the bumper

» Miscellaneous » How to remove the radiator grille of a Lada Granta without removing the bumper

In any car, the radiator grille is one of those elements that catches your eye when you first look at the car. It is located on the front of the car and is therefore so noticeable. The “facial expression” of a car also very much depends on how the radiator grill looks.

It is for this reason that many car owners change it or perform tuning to give their car some individuality. The Lada Granta radiator grill is no exception. You can see many attempts to improve it in various ways.

Many owners complain that this model has virtually no protection for the radiator from dust and dirt entering from the outside. Proper tuning helps eliminate this problem.

Tuning the radiator grille of Lada Granta

How to remove the radiator grille of a Lada Granta

Before tuning this element, let's figure out how it can be removed from the car.

The Lada Granta radiator grill can be removed in 2 ways. According to the classical method, you need to proceed as follows:

• remove the front bumper;
• on its inner side, unscrew the nuts securing the grille, there are 9 of them;
• Click to open 2 locks under the headlights.

Removing the radiator grille along with the bumper on the Lada Granta

The second method makes it possible to do without dismantling the front bumper. The algorithm looks like this:

• Unscrew 6 bolts from the top of the grille;
• bend it, stick your hand in, find by touch 4 bolts at the top and 5 nuts at the bottom - for this you will need a figure eight wrench;
• Under the headlights, use a screwdriver to open the 2 clamps.

After dismantling, you can begin tuning. After this, installation is performed in reverse order.

Tuning using a utility net

Tuning the front part of a Lada Granta car using a Chain-link mesh is very common. Such a mesh can be bought at any hardware store - it can be metal or plastic.

We choose the option with medium-sized cells. This is important to avoid excess dust getting under the hood of the car.

Fine mesh netting for making radiator grilles

Next you need to follow a simple algorithm:

• using one of the methods described above to remove the radiator grille;
• cut off all horizontal and vertical jumpers, leaving only the outer frame;
• using cold welding, seal all the holes that were created after the jumpers were cut off;
• clean the surface from all irregularities and burrs;
• Cut the mesh to size and attach it to the frame. If the mesh is plastic, you can simply glue it. If it is made of metal, heat the frame so that it does not burst, and screw the mesh with self-tapping screws;
• paint and wait for it to dry. At this point the tuning can be considered complete.

Tuning the radiator grill using mesh on the Lada Granta

Installing a radiator grille on a Lada Granta car

After tuning is completed, the Lada Granta radiator grill is installed back. To do this, the finished part is placed in the standard opening in front of the radiator and secured with nuts, bolts and clamps. Next, you need to check how correctly the fit is made and inspect the front part of the machine for irregularities, burrs and protrusions. If any are found, clean them with a file or fine sandpaper.

Installing a bumper with a radiator grill for Lada Granta

Conclusion

Tuning the radiator grille is a good way to make the appearance of a car more attractive, make it stand out from the crowd, and add originality. This can significantly change the visual perception of your car when looking at it from the front.

The car will acquire a more modern, stylish and attractive exterior. It is precisely these considerations that drive those car owners who decide on tuning.

In the case of the Lada Granta car, the argument in favor of alterations of this type is the actual lack of protection of the engine compartment from particles of dirt, dust and moisture entering from the front. This is unlikely to benefit the car. Therefore, many car enthusiasts resort to making radiator protection with their own hands.

okuzove.ru

Replacing the radiator grille. — Lada Granta, 2012 on DRIVE2

I installed the grille as promised in the review and photo.

I had an analog grille, so installation took 15 minutes. Unscrew the 4 bolts at the top and the two nuts on the sides.

I installed the new grille in the same way. At the bottom of the grille there are 5 studs, the nuts on them are 5. I also took a photo of the studs. There is no need to solder them, since they are already in place and are not poorly made. The holes for the bolts are also drilled at the top.

I don’t know who had what didn’t fit, but for me everything fit perfectly. The pins fit exactly into the holes - I was pleased)))

Let me note that I physically cannot tighten all 5 lower nuts without removing the bumper. The hand doesn’t fit)) Only 2 on the sides, but in my opinion this is quite enough.

I also wanted to tell the guys who will remove the original grille without removing the bumper - this is a real hassle) Removing the bumper for the first time when installing the fog lights took 30 minutes. Don't be lazy, take pictures. It's actually easier to remove the grille; there are a lot of bolts.

The grille is painted well. Everything seems to be there)) Photo after washing)))

In the photo, the bottom of the grille is not screwed on, I dropped the nuts and didn’t look for it, but screwed it on later.

Issue price: 1,600 ₽

www.drive2.ru

Removing, installing, replacing the radiator grille trim of Lada Granta VAZ 2190

download photo to mobile phone

Operation, maintenance and repair manual for Lada Granta VAZ 2190

Section 11:

Car body Lada Granta VAZ 2190

Rice. 11.1. Fastening the radiator grille trim of the Lada Granta VAZ 2190: A - nut; B - plastic retainer useful tips for motorists When using site materials, an active link to car-exotic.com is required!

car-exotic.com

Removing and installing the radiator grille Grants

Tuning using a utility net

Tuning the front part of a Lada Granta car using a Chain-link mesh is very common. Such a mesh can be bought at any hardware store - it can be metal or plastic.

We choose the option with medium-sized cells. This is important to avoid excess dust getting under the hood of the car.

Fine mesh netting for making radiator grilles

Next you need to follow a simple algorithm:

• using one of the methods described above to remove the radiator grille;
• cut off all horizontal and vertical jumpers, leaving only the outer frame;
• using cold welding, seal all the holes that were created after the jumpers were cut off;
• clean the surface from all irregularities and burrs;
• Cut the mesh to size and attach it to the frame. If the mesh is plastic, you can simply glue it. If it is made of metal, heat the frame so that it does not burst, and screw the mesh with self-tapping screws;
• paint and wait for it to dry. At this point the tuning can be considered complete.

Tuning the radiator grill using mesh on the Lada Granta

Granta radiator grille

Lada GRANTA was released as a budget car in 2011. The queue for it was huge, and this is understandable. For the people of our country, such a car is an excellent alternative to expensive foreign cars. But some shortcomings were made during development. One of them is the unprotected Granta radiator grille. For some reason, it does not have a mesh to protect it from dust, midges and flying pebbles when moving. Car enthusiasts have always found a way out of such situations. There are already several ways to improve both the protective properties and appearance of vehicles.

How to remove the heater radiator on a grant?

Stove malfunctions

Although there are no complaints about the quality of the heater in these cars, due to certain circumstances (depending or independent of us), it can still fail. The cause of the breakdown may lie:

• pump malfunction;
• clogged radiator;
• air lock;
• loose brackets and contacts.

Many breakdowns, as a rule, can be repaired, but in certain cases, only a complete replacement of the heater can save the situation.

Removing the standard front bumper of LADA Granta

How to remove Grant's radiator grille and tuning methods

When purchasing the newest model from the Volzhsky Automobile Plant, you can expect that you are getting a reliable, modern car at an appropriate price. The car is equipped with reliable parts, an original body and a full list of instruments necessary for comfortable everyday driving. Despite this, craftsmen do tuning, most often replacing optics, wheel rims and completely painting the car.

Tuning the Lada Granta car

The radiator grille is also often replaced. It is by this detail that many judge the character of the car and the capabilities of its owner. Another reason for the huge demand for new grilles is the ease of DIY installation. To do this, you do not need to have certain skills or buy expensive equipment. All you need is straight hands and standard tools that are found in every garage.

2 Making a grid from household mesh

Many new owners of Grants, who are just planning to tune the radiator grille, begin to visit specialized salons in the hope of finding an original part. It is worth saying that this method works great, but only if the buyer has an amount of 5–6 thousand rubles or more. And if you add the payment for installing the grille, then the owner of the new Lada model will have to “take it out and put it in” more than 8 thousand rubles.

To save money, you can create the element yourself. The main material for the manufacture of the radiator grille on the Lada will be a regular chain-link mesh with small cells. You can purchase this product at any hardware store in the country. On the shelves there are both plastic and steel products. In addition to the material for manufacturing, we will also need:

• file;
• needle file;
• hacksaw for working with metal;
• sandpaper or sanding paper;
• cold welding tool;
• fasteners.

Fine mesh netting for making radiator grilles

First you need to remove the standard Lada grille. To do this, we need an “8” key, a Phillips screwdriver and a TORX T20 key. You need to dismantle the part very carefully - it is quite possible that you will need it again. The work of removing the grating must be carried out according to a certain algorithm. First you need to lift the Granta's hood and remove the front bumper. There are 9 nuts under the bumper that need to be unscrewed. After this, you need to pull out the side clamps of the grille and then remove the part.

Upon completion of dismantling, you need to make a frame for tuning. To do this, you will need to cut off the vertical and horizontal jumpers of the bumper. Do not be alarmed if the coating in the front part of the Lada body becomes less rigid - this is a common effect of such tuning. The burrs that appear after removal must be sanded with sandpaper, and then cold welded all the holes obtained after cutting off the jumpers and stiffeners.

Removing the radiator grille Grants

The next step will be preparing the mesh. We will carry out this process according to the frame we received in the bumper. You can secure the Chainlink with clamps and screws. The latter should be heated so that the material of the Lada bumper does not crack during tuning. If you purchased a plastic mesh, you can simply glue it to the inner surface of the frame.

Then you need to decorate the new radiator grille. To do this, we use paint or a special film. If you give your preference to the first, then you need to work according to the same principle as when painting a car locally. Film is a more budget-friendly option, but will take a lot of time.

Many new owners of Grants, who are just planning to tune the radiator grille, begin to visit specialized salons in the hope of finding an original part. It is worth saying that this method works great, but only if the buyer has an amount of 5-6 thousand rubles or more. And if you add the payment for installing the grille, then the owner of the new Lada model will have to “take it out and put it in” more than 8 thousand rubles.

3 Installation of the radiator grille

After processing, the radiator grille is installed on the Grant. To do this, take the finished part and insert it into the opening in front of the radiator. Next, we fix the product with fasteners and check the front part of the body for any irregularities. If there are any, the Lada bumper can be carefully cleaned with a file or fine-grained sandpaper.

Installation and fixation of the finished part on the car

After we have done the Grant tuning, you can take care of the external protection of the car’s radiator. Unfortunately, the manufacturer did not provide this element as standard. As practice shows, this is in vain, because the grille alone is not enough to protect the engine compartment of the Lada from dust and small insects. They severely clog the engine and throttle pipes, which quickly damages the parts.

Additional grille for the radiator

If you don’t want to bother with removing the standard grille of your car, then you can always use radiator protection from Hyundai Grant Starex as a replacement for the standard part. The part fully matches the dimensions of a domestic car, but protects the engine and other parts of the car much more reliably.

By tuning the radiator grille and installing external protection on the Grant, every owner of this car can sleep peacefully. Now no insects, dust and small debris are scary.

Source: https://AutoJiza.ru/reshetka-radiatora-granta-snyat-sposoby-tyuninga/

How to remove a bumper on a grant video

Removing the front bumper Grants

I decided to make detailed instructions for removing the front bumper of the Lada Granta. True, the Internet is full of all sorts of manuals, but still. Maybe someone will find the manual from me useful.

So, what tools do we need:

Open-end or socket wrench 10 mm. You will also need a 10mm socket. with ratchet. 2. Phillips screwdriver. 3. TORX T-20 key. You can't do without Torxes; you can't do without them on Grant.

We remove the bumper in the following sequence:

Unscrew the front license plate. 2. There are two bolts under the sign. 10 mm head. unscrew these bolts.

We unscrew the six bolts securing the bumper and radiator grille.

Using a TORX T-20 wrench, unscrew the 4 screws (2 pieces on each side) securing the fender liners to the front bumper. For convenience, you can turn the wheels all the way.

Next, you need to unscrew 4 more self-tapping screws located at the bottom using the same TORX T-20 key.

Then you need to unscrew the last three bolts from the bottom.

Note: If you have a crankcase guard installed like I do, it will interfere. You don't have to remove it completely. You just need to unscrew the two bolts under the bumper and place something under the protection so that the rear ears do not bend. In my case, these are two empty milk cartons. After all the bumper fasteners are unscrewed, you need to release the edges of the bumper from the latches on the wings. To do this, you need to carefully pull the bumper towards you from the edges. If your car is equipped with fog lights, then before removing the bumper, you must disconnect the connectors from them. Reassemble in reverse order.

But this is a scary view without a bumper.

How to put the rear bumper back

Replacing the rear bumper on a LADA Granta, as well as the front one, may be necessary not only if it is damaged, but also in order to improve the image. Installation is in the reverse order.

After completing the work, connect the battery. Check the operation of electrical appliances. If everything is in order, you can hit the road.

Modification of the radiator grille on the Lada Grant

A beautiful body, which AvtoVAZ designers worked on, a modern radiator grill - Granta is good for everyone. But there is no limit to perfection, therefore, even though the car came off the assembly line relatively recently, tuning enthusiasts are already changing the appearance and internal components of the car to their taste. Moreover, the scope for creativity is enormous. Based on the reviews of the owners, it can be understood that the defects of the Lada Granta are present in the car from the factory, and a lot can still be altered and improved.

Tuning Lada Granta

External tuning or styling is distinguished. This is nothing more than changing the appearance of the car. So, you can change your car almost beyond recognition. Moreover, now everything for this is available and it can all be easily purchased in online stores or tuning centers. Nowadays they even produce entire sets of body kits that allow you to change the car body in certain styles. Such body kits are also offered for the Lada Granta.

But it’s probably not interesting to simply install a body kit bought in a store. Some people like to do everything with their own hands. After all, tuning is a creative process.

Everyone can agree that the most impressive elements of the body, by which it immediately becomes clear what kind of car is in front of us and what its character is, are wheels, headlights and other optics, as well as the radiator grille. Such a seemingly insignificant body detail, like a grille, provides very wide opportunities for tuning. In addition, you can replace the grille with a tuned one without much difficulty. You can also make this part yourself. You don't need any special skills for this. All the tools for this operation are quite standard, and the materials are consumables.

Installing a mesh in the radiator grille

The grille of the Toyota Prado 120 (150) has large gaps, which provides it with insufficient protection. At high speed, a stone can hit them and damage this part of the car.

Without additional protection, the radiator becomes clogged with debris and insects, which quickly renders it unusable. To prevent this from happening, mechanics recommend installing a fine-grained metal mesh.

To do this, you must first remove the radiator grille of the Toyota Prado 120 (150). Then perform a series of actions according to the instructions.

Step by step guide:

1. Cut the desired mesh size. Please note that it will be attached to the bumper. The mesh should be slightly wider and longer than the grille. Measurements can be taken using either a tape measure or cardboard. To do this, first the cardboard of the required size is cut out and fitted to the protection, then the mesh is cut out according to the template.
2. Place it inside the grill and press it down a little so that it takes its shape. Secure the mesh with a tie. It must be taken into account that fastening by other methods (screws, glue) is not reliable enough and the structure may fly off during movement.
3. Carefully install the protection in place.

It is best to start attaching the mesh not from the middle, but from the side. This way it will lie flat in the grate, without distortion. It is advisable to install the ties around the perimeter and in the middle; this type of fastening will be more reliable.

This restyling of the Toyota Land Cruiser Prado 120 and 150 will help protect against unexpected damage and significantly change the exterior of the car for the better.

How to remove the radiator grille of a Lada Granta (two methods) - RepontoMore

Anyone who has at least once seen the latest car model from the VAZ concern will say that a new radiator grille for the Grant is an extremely necessary thing.

Don’t worry, the item fully complies with all standards and has a modern appearance.

However, unlike the grilles on previous Lada models, it tends to let in a large amount of dust, which severely clogs the radiator and engine of the car.

1 Improvement of Lada Granta

When purchasing the newest model from the Volzhsky Automobile Plant, you can expect that you are getting a reliable, modern car at an appropriate price.

The car is equipped with reliable parts, an original body and a full list of instruments necessary for comfortable everyday driving.

Despite this, craftsmen do tuning, most often replacing optics, wheel rims and completely painting the car.

Tuning a Lada Granta car We recommend reading:

The radiator grille is also often replaced. It is by this detail that many judge the character of the car and the capabilities of its owner.

Another reason for the huge demand for new grilles is the ease of DIY installation. To do this, you do not need to have certain skills or buy expensive equipment.

All you need is straight hands and standard tools that are found in every garage.

How to remove a bumper on a grant video

Greetings to everyone who came to my page to read the BZ!

I have plans for the weekend, one might say grandiose and long-awaited. For a very long time I could not find the time to install the fog lights. I've had them collecting dust in a box for almost half a year. Finally, the installation time has come! To install fog lights, you must remove the front bumper. And since I don’t want to do this procedure a thousand times, it was decided to immediately change the standard signal (fart in one word), and also install an ambient air temperature sensor. But I will write about all this in the following posts. And today I decided to write down detailed instructions for removing the front bumper of a Lada Granta. True, the Internet is full of all sorts of manuals, but still. Maybe someone will find the manual from me useful)

So, what tools do we need:

READ Ignition switch VAZ 2101 connecting wires

Open-end or socket wrench 10 mm. You will also need a 10mm socket. with a ratchet.

2.
Phillips screwdriver.
3.
TORX T-20 key. Where would we be without torx screws? On the Grant there is no way to do without them))
We remove the bumper in the following sequence:

Unscrew the front license plate.

2.
There are two bolts under the sign.
10 mm head. unscrew these bolts. We unscrew the six bolts securing the bumper and radiator grille.

Using a TORX T-20 wrench, unscrew the 4 screws (2 pieces on each side) securing the fender liners to the front bumper. For convenience, you can turn the wheels all the way.

There are many reasons to remove the body kit - a minor accident or tuning. There are many options for Grant - at a price of ten to twenty thousand you can buy a set of ABS plastic and transform your car. Yes, and minor rubbing in is not uncommon. This means that it is important to know how to remove the bumper on a Grant.

Radiator grille for Grant: do-it-yourself tuning

The Lada Granta is attractive in every way, because in addition to its economical price and great demand, it looks more than decent in appearance. The designers did a good job not only on the body, but also on its additional elements, in particular I would like to highlight the modern Grant radiator grille.

However, it doesn’t stop there, because tuning fans are increasingly resorting to modernizing the interior of the car and its exterior to their own taste. Moreover, the potential for creativity is inexhaustible.

Based on the reviews of the owners, we can conclude that the Lada Granta contains defects that can be redone and corrected.

Lada Granta, relevance of tuning

Styling or the more popular word tuning can be heard more and more often from the mouths of car enthusiasts. This is the name given to the process or result of modernizing the appearance of a car.

It is possible to change your car almost beyond recognition. In addition, now this can be done much easier than before, because there are more and more tuning centers and specialized online stores. There are even ready-made body kits available that allow you to change the car body to suit a certain style. Lada Granta was no exception.

However, for sure, installing a ready-made body kit purchased in a store is not as interesting as doing it yourself. After all, tuning is a creative process.

Many will agree that the most spectacular external components of the body, by which it becomes clear what kind of car is in front of us, are headlights, wheels, all kinds of optics and a radiator grille.

In the Lada Granta, at first glance, the grille is not such a significant body detail, but it provides many opportunities for tuning. In addition, in the Lada Granta, tuning the radiator grille can be done without much difficulty. In addition, this spare part can be made manually.

It is not necessary to have special skills for this. To perform this operation we will need standard tools and consumables.