Which expansion tank to put on a VAZ 2114

Inflates the coolant reservoir of the VAZ 2114

The cooling system reservoir swells and tears along the seams. Replacing the tank cap and the tank itself did not give any results. Could the cause of the tank swelling be due to a leaky cylinder head connection and the cylinder head itself? That is, does the cylinder head gasket itself allow gas pressure to pass into the coolant cavity?

Strong steam from exhaust 2110 – 5 answers
The oil sensor came on after replacing the cylinder head in 2110 - 3 answers
The stove on the VAZ 2110 does not work - 3 answers
Where can oil leak from above the manifold on a VAZ 2110? – 2 answers
The cylinder head gasket has smaller coolant holes - 2 answers

Check with a gas analyzer whether there are gases in the expansion tank.

If the engine is not overheated, then the cylinder head gasket lasts until the engine itself is overhauled (that is, it is approximately 150-250 t.km.).

For gases in the cooling system. If the expansion tank plug is working properly, then it should relieve pressure, that's why it has a valve there in the plug. Bloating occurs due to a faulty valve in the tank plug.

... The problem was that the cylinder head gasket had become unusable and began to leak gas pressure from the working chambers of the cylinders into the cooling system of the internal combustion engine. The boost was so powerful that it unraveled the antifreeze tank along the seam - the plug did not have time to bleed it out.

To check, I removed this plug from the expansion tank and tied a balloon to the neck with threads. I started the engine and the balloon began to inflate... May 1 is now far away, opening a company for inflating balloons will not be profitable, so I bought a cylinder head gasket and replaced the old one myself. It was slightly reconstructed, loose...

After replacing the expansion tank (I left the old plug) there are no comments on the operation of these components.

The coolant in the system of a VAZ-2114 car can not only properly perform its tasks, preventing the engine from overheating and heating the interior, but also create numerous problems. This is her nature.

Why the coolant temperature light may be on: opinions of car owners

1. The reasons may be different.

“When the temperature warning light starts flashing while the car is moving, you need to look at what level the coolant is. It is possible that the level is not high enough or the coolant has reached too high temperatures. It happens that the level remains within normal values and then it may make sense to check the operation of the fan fuse. If everything is in order there, then it’s better to go to the nearest workshop, trying to adhere to a low speed limit.”

2. The result is obvious.

“I was very concerned that the coolant temperature light was constantly on. In this case, there is no level sensor in the car. Following the advice posted on the forums, I removed the dashboard and soldered the connector and everything that was in doubt. As a result, the temperature light stopped blinking.”

3. I spent a lot of energy.

“I’ll share one story with you... I observed the coolant light blinking chaotically. It happened to burn at idle, and in motion, and at speed, and without. At times it stopped blinking.

As a result, the following actions were taken:

The fuses have been checked and replaced.
Checked belt tension.
Checked coolant level.
Due to the low level of antifreeze, a flushing and purging was done and the coolant was replaced.
Replaced instrument panel
Checked for leaks from the stove.
Thermostat checked.

A lot of effort and time was spent on finding out the reason, but in the end everything turned out to be simpler - the cause of the light bulb turning out to be the wiring...”

4. Just tightened the nut.

“Not long ago I noticed that the coolant temperature light was on and blinking. At times the temperature sensor did not work. It turned out that the mass securing nut, which is located at the bottom of the engine, had become loose. When the motor was turned on, one end of the mass came into contact with the engine for forced passage of liquid, and the second generally clung to something incomprehensible. After I tightened the nut, the light bulb began to work as it should.”

What is this?

Or rather, what he looks like. The expansion tank is a container made of plastic. Liquid is poured inside it, which takes part in cooling the motor.

In addition to the hoses that are connected into a circuit, the tank design also includes a float sensor. With its help, information about the temperature of this liquid is transmitted to the car’s instrument panel inside the cabin.

This unit is located under the hood, on the driver's side. You can easily find it right behind the glass counter. Such placement cannot be called practical, since there is metal on all sides of the tank. Therefore, the metal does not allow the plastic to expand properly if the reservoir cap does not work properly.

The result is the same - the container bursts. This problem is especially relevant in the summer, when the car heats up not only from the engine, but also from active sunlight.

Repair or replace the tank?

Some drivers, having noticed that the expansion tank 2114 is leaking, try to repair the crack with glue or epoxy resin.

It should be noted right away that doing this is absolutely not worth it. After all, such repairs, as a rule, are short-lived, and with active use, even the most reliable adhesive seam can leak.

In addition, as already mentioned, the appearance of cracks in the tank is a sign of aging of the plastic caused by depolymerization - the volatilization of a number of fractions from the material that give it plasticity.

Thus, a plastic container that has already cracked can always crack again. That is why replacing the expansion tank of a VAZ 2114 is the most preferable option rather than repairing it.

As for the cover, it is also not repairable, and in case of malfunction it should be replaced with a similar one. At the same time, it is highly advisable to purchase the “native” cover for the 2114, and not its various analogues, the quality (and functionality) of which may be much worse.

If you could not find a cover for the 14th model, then instead you can purchase and install a cover for 2199, since they are completely interchangeable.

Is repair possible?

A very common question that we can answer without any problems.

Repairing the expansion tank is only relevant if it is necessary to replace one of its components. That is, a float or a lid with a valve.

In any other situation, when the breakdown is associated with loss of tightness of the tank, no repair will be possible. Some use adhesives, sealants, and other methods to close cracks. But such pseudo-repairs will not lead to anything good. All you need is a complete and complete replacement of the expansion tank of the VAZ 2114.

Buying Tips

Since the expansion tank for the VAZ 2114 is inexpensive, you should not save on its purchase. It is better to install a new original spare part . If you can’t find it, then you should give preference to parts from well-known manufacturers with a positive reputation. These include Togliatti, Master-M.

to inspect the spare part before purchasing . Even a new part may have defects. The tank must be made of high-strength plastic and have a certificate. It is better to make purchases in specialized stores. There is a higher probability of purchasing high-quality spare parts.

If you still want to save money, then you should consider used options. When choosing such a spare part, special attention must be paid to its condition . It is not recommended to take the tank from a car dismantling point.

To avoid such unpleasant consequences when purchasing online, you should adhere to the following recommendations:

Choose a proven and reliable organization.
Do not send money to the seller until you have received and inspected the part.
Require the provision of a warranty certificate (if we are talking about ordering a new spare part).
Give preference to those sellers who offer free shipping.

Recommendations for selection

For VAZ 2110-12 models, you can find 2 types of expansion tanks on sale:

old model with two necks: the coolant level sensor is screwed into the first, and the second is closed with a plug with a release valve;

On old-style products, a second neck was made for installing an antifreeze level sensor

The new sample container does not have a level sensor

If your car has a sensor in an expansion tank, then you need to select an old-style product. Accordingly, versions without a sensor will require a new reservoir design.

For VAZ 2114-15 models, tanks of the same shape are offered with 3 fittings: two of them are located at one end, and the third is located at the opposite end. Products for the VAZ 2110 and 2114 are not interchangeable with each other, although if you really want to, attaching a part from another model is quite possible. Another thing is that there is no need for this - both varieties are available for free sale and practically do not differ in price.

The reservoir for models 2114-15 has a wider shape and a versatile arrangement of fittings

When purchasing an expansion tank for any series of cars of the “tenth” family, pay attention to the following points:

the plastic of a quality product should be light and half transparent;
cracks in the corners or near the fittings are unacceptable;
the plastic should not be “oaky” or have dark impurities visible to the naked eye;
look on the body for an imprint of the manufacturer's trademark and catalog number (21083–1311014 for VAZ 2114).

For all modifications “ten”, “fourteen” and “fifteen” a small tuning is available - installation of an expansion tank from the cooling system of a Lada Priora car. Why and how this is implemented will be discussed below.

The reservoir of the Priora cooling system has a rectangular shape and 3 fittings on the front wall

Video: how to distinguish an original spare part

Causes of failure of VAZ 2110-2115 tanks

The service life of this element is not limited by regulations. This means that the container should be changed as needed, and this occurs quite often. The most common reason for replacement is damage to the integrity of the plastic case during operation . The tank simply bursts and here's why:

Clogged or damaged lid valve. The steam coming from the radiators increases the pressure inside the tank because it cannot escape through the plug. As a result, the wall of the container is destroyed.

Damage to the plastic wall occurs due to excess pressure in the cooling system
In VAZ 2110-12 cars, the side walls of the vessel are closely adjacent to the body elements - the glass and the partition. As the antifreeze temperature and pressure in the system increase, the plastic has nowhere to swell, causing the body to burst along the seam at the end (usually in the lower corner).
In the event of a breakdown of the gasket between the cylinder head and the engine block, the cooling system is subjected to a series of water hammers created by the movement of the pistons. The plastic case also often bursts from such an impact.
The reason may be the expansion tank itself, made from low-quality raw materials or in violation of plastic molding technology.

On low-quality products, cracks may appear 3-6 months after the start of use.

To avoid destruction of the expansion tank, it is recommended to check the functionality of the plug valve before each long trip. Practice shows that problems with the tank most often arise on the road, when it is hot outside, that is, in the summer. A sign of a malfunction is a sharp increase in coolant temperature and a puddle under the engine compartment on the driver’s side.

Experienced drivers advise replacing the standard tank cap with the cap from previous VAZ 2109-099 models. They are much more reliable in operation and fit the thread. Just keep one thing in mind: in some car configurations the plug is equipped with an antifreeze level sensor. After such a replacement, you will not be able to control it, although this will not affect the performance of the cooling circuit.

Coolant tank replacement process

General view of the expansion tank

The expansion tank not only serves as an indicator of the amount of coolant in the system, but also when the “coolant” boils, it will come out through it. Usually the latter reason is the reason for depressurization in the system and the appearance of cracks.

In order to make the replacement you will need certain tools. So, what is needed to complete the process:

Keys for 7 and 10.
Screwdriver.
Pliers.
New tank.
Sandpaper.

Now that everything you need has been collected, you can proceed directly to the process itself. So, let's consider the sequence of actions aimed at replacing the expansion tank:

remove “casting” defects

Cleaned cavity of the expansion tank under the pipe

Unscrew the valve and remove it from the tank

Removing the expansion tank

We connect the pipe for exhausting evaporative gases

We check the coolant pipe for leaks and integrity

We connect the pipe and install the expansion tank in place

Choice

21083-1311014 – original catalog number of the expansion tank for the VAZ-2114 family of cars. The part is produced at the factory and has no analogues, but some car enthusiasts come up with modifications to this unit or tuning.

The average cost is 400-500 rubles.

Photo report on replacing the expansion tank on a VAZ 2114

With the onset of cold weather, the antifreeze began to leak, and it turned out that the expansion tank had cracked at the seam. I bought a new tank from SEMZ (21083-1311014), it has good reviews and looks high quality. I took the plug from Priora from Lynx (2170-1311065-01), I liked how the valves were made on it.

At the same time I bought a pipe from the tank to the thermostat (21082-1303080) and normal spring clamps (Norma FBS 28) instead of screw ones. I set the clamps to 28 mm, 27 mm fits on the pipe, but when the pipe is put on the fitting, the clamp does not pass through the expansion on the fitting. True, there is a feeling that the pipe on the thermostat fitting is not pressed very well, but so far there is no leakage in this place.

Result:

Purchase of components

There are some helpful tips to follow when purchasing new parts to replace your expansion tank.

Buy the original. The original tanks are ideal for the “fourteenth” AvtoVAZ model. Therefore, various analogues are inappropriate here. The level of quality and efficiency of the original is much higher.
If a cover is required, then use the analogue from model 2199. They are fully compatible even with threads. Plus, the practice of VAZ 2114 owners shows that the “nine” cover works better than the original one.

COOLING SYSTEM VAZ 2114

Once upon a time, back in Soviet times, water was poured into a car radiator as coolant. But it was very inconvenient - in cold weather it had to be drained regularly so as not to defrost the system, and in the morning before the trip I had to run around with buckets of hot water. In addition, the cooling jacket in the cylinder block and in the cylinder head suffered from corrosion. Nowadays, water is practically no longer used; antifreeze or antifreeze is poured into the cooling system (CO).

The volume of VAZ 2114 coolant in CO is about 8 liters (7.8 liters according to factory conditions). A car that has rolled off the assembly line can be filled with any coolant; the manufacturer does not adhere to any specific rules in this matter.

But if the fluid runs out or the time has come to replace it, then topping up or replacing is necessary. And here you need to know what is poured into the system, and whether it is possible to mix antifreeze with antifreeze.

ANTIFREEZE

The name "antifreeze" contains Greek and English roots. The Greek “anti” means “against”, the English “freeze” translates to “freeze”. Therefore, the coolant located in the cooling system must not only prevent overheating of the internal combustion engine, but also not freeze in frosty weather. The basis of antifreeze is ethylene glycol, and the freezing point of the coolant depends on how much water is added to the chemical composition. The fluid components do not cause corrosion of engine parts.

The composition can be of almost any color; ethylene glycol itself is colorless. The composition is painted so that it can be seen in case of leakage, and so that it is not drunk by mistake; the antifreeze itself is poisonous. In addition, the old coolant changes color, which means it is time to replace it.

Antifreeze

Antifreeze is a type of antifreeze, only at one time it was specially developed for VAZ cars. It is blue in color and can be concentrated, diluted 60% with water (grade A-40M), diluted 35% (A-65M). The concentrate is not used in its pure form; it is diluted at your discretion, depending on the freezing temperature that is oriented towards in the region where the car is located. Antifreeze has a more aggressive environment, but this does not mean that it is of low quality.

MYTHS ABOUT ANTIFREEZE AND ANTIFREEZE

Antifreeze is worse than antifreeze. This is not true. Both coolants are made from the same base (ethylene glycol). But their density is different, and different instruments (hydrometers) are used to measure this parameter.
The color of a liquid is an indicator of quality, and its composition depends on the color. In fact, the composition of the coolant is basically similar for all, and does not depend in any way on the color. Antifreeze is mainly tinted green and red.