How to change the door handle on a Grant video

Door handles on modern Lada cars are quite reliable. However, there are cases when, in severe frost or when excessive force is used, the handle mechanism breaks and fails. In this case, it needs to be replaced. The reason for the replacement may also be the desire of the car owner to switch to the handles from the Luxury package, which are painted in the color of the body and are more pleasant to use. Regardless of your motivation, the work will be almost identical.

Before starting the work process, prepare the following tools: an “8” socket or an open-end wrench of a similar size, an extension, a ratchet, a Phillips and slotted screwdriver, plastic spatulas for working with interior plastic, penetrating lubricant in aerosols. Before starting work, disconnect the negative terminal from the battery to avoid a short circuit.

To replace the outer handle of the Lada Granta door opening, we will need to remove the door card to gain access to the inner nut securing the handle. On the front doors, unscrew the screws in the indicated places with a Phillips screwdriver, unscrew the plastic cover of the door lock button and, using a plastic spatula, unclip the door card from the body element. On the rear door, the fastening screws are located under the plastic cover of the door handle; by snapping it off we will gain access to them.

We advise you to use specialized spatulas for working with plastic; such a tool will avoid damage to the plastic and worsen the appearance of the car interior.

After the door card is released, disconnect the power wiring for the power window buttons, if your vehicle has them.

To remove the external rear door opening handles, you will need to use a socket with an “8” extension or an open-end wrench of a similar size to unscrew the two attachment points of the external door opening handle. One nut is on the inside of the door, the second bolt is on the outside.

Further actions will depend on the year of manufacture of the car. If you have a Lada Granta Liftback, or a Lada Granta Sedan / Lada Kalina released later than the fall of 2014, then in your case a rod is used in the rear door opening drive. You will need to additionally release the metal rod retainer from the door lock. If you have a car manufactured earlier than the fall of 2014, then no additional actions will be required.

After releasing the fastening points, we move the handle in the direction of travel of the car and, simulating the opening of the outer door handle, rocking it, remove it from its seat.

Considering that since 2014 AvtoVAZ has changed the type of rear door lock drive from the external opening handle, it is possible that the mechanism on the handle does not correspond to the lock mechanism. If this happens in your case, you will need to move the door lock drive from the old handle to the new one. To do this, you will need to loosen the tension of the return spring and knock out the pin holding the drive. Use a slotted screwdriver to pry up the edge of the return spring and remove it from the seat.

Let's proceed to the second stage: dismantling the side view mirror

Using a screwdriver, unscrew the three screws that secure the mirror frame to the body.

Using pliers, remove the locking bracket.

We remove the mirror and remove the hinges through the diagnostic hole.

Using an “8” socket, unscrew the bolt that secures the outer handle to the end of the door.
In the inner tunnel, unscrew the second bolt holding the handle.
Using a screwdriver, carefully pry up and remove the rods from the lock.
We remove the handle from its seat, turning it slightly from side to side.

Front door lock device of Lada Granta

In conclusion, we carry out troubleshooting, inspect adjacent parts and mechanisms, and replace them with new ones as necessary. Replacing the front door handle on the Lada Grant is completed.

Replacing the door handle Kalina left rear

Many owners of Lada Kalina cars are faced with the problem of opening the rear doors.
This occurs on both old and brand new cars, and this defect can be attributed to a manufacturing defect. But, apparently, no one at the factory thought of modifying the handle mechanism. Moreover, there is no such problem with the front handles, it only exists with the rear ones. Recently, on my Kalina, due to constant excessive force when opening, the rear door handle broke off. Since repair kits for this part could not be found, I had to buy a new one assembled. Its price is 330 rubles. To replace you will need the following tool:

8 mm head
Extension
Ratchet or crank

Review of spare parts prices

Name/article	Price, rub.)
00001003833121 Bolt M5x10 with serrated shoulder	From 100
00001003831801 M5 nut with serrated shoulder	From 100
00001002624101 Washer 5 mm	From 50
00001003275901 Screw M6x10	From 50
00001002605371 Lock washer 6 mm	From 50
21230610542000 Lock cylinder	From 550
11180610515000 External front right handle	From 650
11180610515100 External front left handle	From 650
21900610518000 Inner front right handle assembly	From 950
21900610518100 Inner front left handle assembly	From 950

*prices are current as of November 27, 2018.

Recommendations for choosing and replacing door handles

When choosing spare parts, always give preference to original ones. Good, high-quality parts are always 10 - 15% more expensive than analogues. At the same time, by purchasing a factory part, you can count on a long service life of the mechanism.

A cheap counterfeit does not provide even a third of the required resource. The final choice is up to the owner of the technical device. The deciding factor is the budget.

➤ Rear right grant door lock - troubleshooting

Rear door locks from Grant

The dismantling of the door handle on the Lada Grant is carried out in the event of mechanical damage, deformation, or detection of a defect. The design of the handle is simple, and the fixation scheme is intuitive.

Removing the outer handle. Preparatory stage

Necessary materials and tools to remove the rear door handle:

car keys;
rags;
graphite lubricant;
new components (as needed).

Sequence of actions when replacing the rear right (left) door handle

We carry out the work modularly, since initially it is necessary to dismantle the casing, the internal filling, and unscrew the handle latches.

Stage No. 1: dismantling the card.

We place the car on the site, provide priority safety measures, and activate the parking brake.
Open the rear left door and raise the glass to the top position.
We twist the blocker (soldier).
Use a screwdriver to pry up the fastening of the window lifter handle, remove it from the grooves, and remove the lock.
We pry the plastic insert in the center of the card and unscrew the bolt.
The remaining three bolts are located in the lower perimeter of the card, as well as behind the door handle.
The plastic card is attached to the metal body with ten clips. During the dismantling process, be extremely careful, as the clips are too fragile and often break.
Snap off the card in a counterclockwise direction.

Stage No. 2: disconnect the door lock rod and remove it from the door cavity.

Using an “8” socket with an adapter, unscrew the bolt securing the handle.
Using a screwdriver, carefully pry and disconnect the lock bars from the inside.
We move the handle in the “forward” direction and remove it.

This completes the process of dismantling the unlocking element. Next, we carry out preventive maintenance, install new parts, and assemble the structure in the reverse order.

Name/article	Price, rub.)
External handle 11180-6205151-00	From 425
RENAULT/LADA 11180-6205151-00	From 385
11180-6205150-00	From 420
Internal handle 21900-6205181-00	From 135
21900-6205180-00	—/—
Bolt M5x10 00001-0038331-21	From 10
Nut M5 00001-0038318-01	From 10
Screw M6x10 00001-0032759-01	—/—
Lock washer 00001-0026053-71	—/—

*prices are current as of November 28, 2018.

Recommendations for selection

Without a doubt, when choosing, give preference to parts with factory catalog numbers. Purchase consumables exclusively from official representative offices, service stations, and auto stores.

Before purchasing, check the catalog numbers of parts with the actual data specified in the operating instructions. If such a book is not available, seek advice from service center specialists, download recommendations from the Internet.

Step-by-step instructions for dismantling the rear right (left) door lock on a Lada Grant

We carry out the work modularly: dismantling the card, removing the internal filling, handle, lock.

We repeat the previous steps.
Using a screwdriver with a Phillips bit, unscrew the fastening of the intermediate lever of the locking rod and move the base of the lever.
We remove the locking tab from the standard hole. Use a screwdriver to unscrew 3 bolts
From the end of the door, unscrew the three screws securing the lock at the base.
We remove the lock assembly with an electric drive through a special technological window.
We press the latches on the sides and disconnect the block with wires from the product.
If necessary, remove the rod, press out the plastic lock, and turn it around the axis.

We lubricate the moving mechanisms, install a new lock, and assemble the parts in the reverse order.

The rear door lock cannot be repaired if it shows signs of deformation of the housing.

Rear door lock device

Review of Manufacturer Prices

Name/article	Price, rub.)
Rear door lock 21900-6205013-10	From 2000
21900-6205012-10	—/—
21900-6205013-00	From 650
Locking pin 11180-6105228-00	From 150
Screw 21080-6105268-00	—/—
Bushing 11180-6105276-00	From 100

*prices are current as of November 28, 2018.

Adjusting the rear door lock

The doors are difficult to open, the lock is jammed, an extraneous squeak appears when unlocking - the first signs of the need to adjust the door lock. The problem is common among domestic transport.

The left side wears out prematurely due to frequent use.

Inexperienced owners practice eliminating damage by lubricating the mechanism. However, the effectiveness of such a solution is low. Service station technicians recommend the following adjustment:

Loosen the bracket using an impact screwdriver.
Move the bracket up (down) a few millimeters, while simultaneously trying to slam the door. We move the mechanism a few mm and check for functionality
As soon as we achieve the result, we firmly fix the bracket.
Lubricate the rod with a thin layer of Litol, graphite lubricant.

This completes the adjustment of the rear door locks.

The above algorithm is effective provided the lock is in good condition. What to do if there is a curvature or deformation on the door frame? In this case, the experts advise making improvements:

We open the back door.
We insert a plastic stopper into the lock so that it does not close.
Using a triangular file, carefully file off the sharp ends of the lock teeth. We do this carefully so as not to break the mechanism. The place to be filed with a file
We remove the plastic stopper and check that the mechanism is working properly.

Along with adjusting the lock, you have to adjust the door. The reason is the increase in the radius of curvature of the frame. The defect is common and can be corrected by straightening the curvature.

No special tool is needed, the strength of the hands of the master (repairman) is enough.

Since 2015, AvtoVAZ has launched mass production of rear door locks of a new type on the Lada Grant. This is a modernized version of the previous locking mechanism.

The main difference is not only in cost, but also in the change in design and the use of durable polymer. This made it possible to significantly reduce the knocking sound when hitting a metal loop.

Adjusting the front left (right) door lock on the Lada Granta

In the process of systematic use of the door, its frequent opening and closing, the lock and adjacent elements wear out. As a result, the door closes with a distinct knocking sound.

Often knocking occurs after an accident due to changes in body geometry. The functionality of the lock can be restored by partially repairing it, and in case of deformation, by completely replacing it with a new one.

screwdrivers, set of auto tools;
lubricant;
liquid WD-40.

Procedure for removing the driver's door handle

Answering the question of how to remove the Lada Granta door handles on the driver's side is a little more difficult. It is important to consider that this plastic item has a lock installed, so the cause of the mechanism malfunction may be due to a broken cylinder. You will need a Phillips screwdriver, an 8mm wrench and a knife. Basic steps for dismantling:

The fastening fragments are unscrewed from the top and inside.
Traction is turned off. The handle is removed. If the cylinder needs to be replaced, the lock cylinder latch is released. It can be easily removed with a simple screwdriver.
A new core is installed after first removing the larva. To do this, the plastic tip of the rod with the lock switch lever is disengaged with a screwdriver.
The part is fixed with bolts on both sides and tightened.

Reviews

№	Positive
1.	Vitaly: for two years of operation of the car, there are no comments on the body or locks. From time to time I lubricate the components myself; for this I bought a special grease gun. To prevent the core from freezing in winter, I spray it with an aerosol.
2.	Gennady: I used the aerosol several times to lubricate the core in winter. The door slams easily, the plastic does not rattle, the sound insulation is standard.
3.	Vasily: after using the car for a year and a half, I only replaced the factory vibration and noise insulation and re-lubricated the door mechanism. Everything works as usual, there are no complaints.
4.	Kirill: I’m happy with the car, the build quality is good, I fix minor breakdowns on my own.
5.	Gennady: During the year, I made one unscheduled visit to the workshop to lubricate the door components. The central locking works properly and stably. Poor sound insulation, but this is easily fixable.
6.	Alexander: my positive review of the Lada Granta, the car is good, it fully meets the “price-quality” criterion. Minor flaws are present, as the model is in the budget segment.
7.	Ivan: I drove 75,000 km on Grant, I didn’t make any capital investments, I just bought consumables for maintenance. I treat my equipment with care, fill it with high-quality fuel, and periodically lubricate it.
Negative
1.	Victor: The standard locks are very weak, they wear out quickly, after which the door rattles and knocks. A year and a half has passed since the purchase, and the mechanisms already need to be changed.
2.	Dmitry: after another winter, the castle on the left side flew away. There is no point in repairing it, since repairs will cost more than buying a new one.
3.	Vyacheslav: the factory hinge on the left side lasted only 80,000 km, after which it was replaced with a new one. The service life is short, the quality is very poor.

Conclusion If the need arises, you can replace the door handle on the Lada Grant yourself. The process is not complicated, and the principle of operation is intuitive.

When selecting and purchasing consumables, give preference to parts with factory catalog numbers. When contacting a service station, request a quality guarantee for the work performed.

People, how did you deal with dangling door handles? If they replaced them with new ones, where is the best place to order them? As far as tightening is concerned, it's useless, I just took it apart and tightened everything up, it seems to be fine, I put everything back together and started checking it for opening and closing, and it started to hang out again((

Today I went to the service center, the clutch pedal was squeaking, they fixed it + the squeak was removed

by Adminrive · Published 05/14/2014

Who poured OEM oil into the engine?

by Adminrive · Published 12/03/2015

Withdrawal algorithm

Unscrew the door lock.

Removing the lock pin

Unscrew the bolt in the door closing handle.

In the niche of the door closing handle

Remove the plastic plug in the door card “in the middle”. Behind it we find the bolt and unscrew it.

Unscrew the two bolts from the bottom of the door. They are clearly visible.

We begin to pull the casing towards us. I start tugging at the bottom where the pocket is. Then I go upstairs.

Once the trim is off the pins, pull the trim up and out of the lock mechanism.
Next, disconnect the power window chips. Remember their location for further assembly of the structure.
If you have audio system speakers in the doors, then disconnect the male and female connectors from the speakers.

Since I did it in the cold, there were some losses. One seat broke off from the door trim card; the piston remained in the door.

How to correctly replace the handle on the rear door in a Lada Grant

Replacing the rear door handle of a Lada Granta is indicated when it breaks or wears out. In other situations, the driver's desire to change this item may cause scratches or microcracks on parts that spoil the appearance of the interior. If in the case of passenger structures only the handle needs to be changed, then in the driver’s door the lock that unlocks the door will also need to be changed. Sometimes replacing the opening mechanism is necessary because the lock cylinder has been damaged by an intruder.

Removing and installing the outer rear door handle on Kalina

So, before starting this repair, you will need to perform a procedure such as removing the door trim. After this you need to do the following:

Unscrew the fastening nut from the inside of the door
Unscrew the bolt from the end of the door
Remove the handle assembly from the outside
Install the new part in reverse order
Secure the bolt and nut into place

What exactly breaks down in the mechanism?

In this case, the metal tongue that moves the lock rod was broken off, thereby opening it. This breakdown looks like this:

Rear doors don't open well

Be it Lada Kalina or Lada Granta - both of these cars are now very popular among Russian car enthusiasts. However, on some models during operation, a malfunction such as rear doors that are difficult to open is observed.

And this happens because the doors or locks were poorly adjusted at the factory. This deficiency can be eliminated by contacting an official dealer, or you can fix everything yourself.

Door adjustment process

While adjusting the door

Before you start work, first inspect all the gaps for the correct geometry of the body, on the sides, top and bottom, and depending on where the inaccuracy is found, you should start working.

Adjusting the bottom of the door

Open the car window.
Apply light blows with your palm to the bottom of the door.
In order for you to understand more clearly what we are talking about, we bring to your attention a video about how a similar issue is resolved at the Renault plant.

Adjusting a door with a large gap at the top

We lower the window completely. Depending on the configuration, we use either a mechanical handle or a window lifter for this.
We close the door until it clicks.
Pull the top edge of the door away from you or toward you.

Door lock adjustment

First of all, loosen the three bolts that secure the lock in place.

Door locking mechanism (shackle adjustment)

Three door lock bolts