We independently remove the dashboard of a VAZ 2107

Hello everyone, today I want to look at the instrument panel on a VAZ 2107 car. This article is suitable for those who have just bought this car or are generally a beginner, but really want to understand the instrument cluster.

The instrument panel of the VAZ 2107 consists of indicators that display performance indicators of the engine and other important components of the car. Instrument readings allow you to immediately notice malfunctions and eliminate them in a timely manner. Therefore, it is imperative to know what each device on the control panel is responsible for and monitor their readings.

Which torpedo is suitable for the VAZ 2107? When you want comfort

Many owners wonder which torpedo is suitable for the VAZ 2107. This is not an idle question. After all, the driver spends most of the time on the road looking at the dashboard. The “seven” torpedo was developed more than 30 years ago. In this regard, its angular shape hurts the eye. Also, the devices are quite faintly visible. After all, their scales are simply painted on plastic with white and sometimes red paint. This reduces the ability to see instrument readings in the dark. Also, this appearance has no attractiveness. Therefore, many drivers replace dashboards.

Installation of LED lighting for VAZ 2107 devices

Tuning the dashboard of the VAZ 2107 with changing the backlight will create a unique style for the interior of the “Seven” at night. Installing LED lighting is not difficult; it does not require special skills or equipment.

LEDs can be installed behind the instrument dial, in places where standard lamps are installed, or placed around the perimeter of the instruments.

Installing LEDs in place of the standard backlight provides better illumination of the instrument scale, therefore it is more preferable. When connecting LEDs, pay attention to the polarity, otherwise the backlight will not work.

It is also worth replacing the standard backlighting of switches and control buttons with LEDs of the same color as on the instrument lighting. This will create a single, harmonious dashboard style.

Torpedoes that fit VAZ 2101-2107 1) VAZ 2105 2) VAZ 2106 3) VAZ 2107 4) VAZ 2108-09 5) BMW 325 6) Ford Serra 7) Opel Kadett E Opel Vectra A

The torpedo (correctly - torpedo) is the upper part of the front panel of the car. The lower part (where the gearshift knob and radio is located) is called the BEARD. The torpedoes of old VAZ models are distinguished by their asceticism and unpretentious design, which is why many car owners have a desire to improve them.

There are several methods to improve them.

1. The most radical thing is to replace the VAZ torpedo with a torpedo from a foreign car, or from an older VAZ model. This will be explained in more detail below.

2. Painting the torpedo - this method is the least common, due to this. That the surface of the torpedo is not hard and is difficult to paint correctly. Also, the painted surface of the vase torpedo often does not look as attractive as other methods.

3. A new method, not yet widespread, but very promising - covering the torpedoes of vases with vinyl film. Vinyl films come in carbon, matte, glossy and any colors.

— Pros: applied in one piece to the complex surface of the vase torpedo; looks great; easy to use and durable.

— Disadvantages: difficulty in application and some exceptions in the torpedo material. There are some types of plastics on which application is impossible - the film will not stick.

4. Covering the vase torpedo with leather. The most expensive and most aesthetically attractive method. Correctly covering a vase torpedo with leather is a complex process that requires certain skills and knowledge, but the result will exceed your wildest expectations.

5. Flocking (flocking). A relatively inexpensive and aesthetically attractive method of renewing the coating of a vase torpedo. Beautiful, inexpensive, durable. I've had it for 3 years now - it's faded a little, but the surface is fine.

VAZ 2101 torpedo. First generation of VAZ torpedoes. Interchangeable with VAZ 2106, VAZ 2107, VAZ 2105.

VAZ 2106 torpedo. The main disadvantage of this torpedo is the insufficiently thought-out blowing system. That is, it does not have airflow on the side windows, and in cold weather the windows fog up or freeze. It is solved by installing a torpedo from a VAZ 2105, or a VAZ 2107, where air ducts are provided for the side windows, as well as blowing the windshield. All classic torpedoes, due to the similarity of designs, can be replaced with similar ones from other models.

The VAZ 2107 torpedo is the best and most convenient of the torpedoes of the classic VAZ models.

There is also the possibility of installing a torpedo from a foreign car, for example a BMW E30, in a classic VAZ. But there are a lot of alterations: installing electric windows, moving the gearshift lever and many others

Many owners wonder which torpedo is suitable for the VAZ 2107. This is not an idle question. After all, the driver spends most of the time on the road looking at the dashboard. The “seven” torpedo was developed more than 30 years ago. In this regard, its angular shape hurts the eye.

Also, the devices are quite faintly visible. After all, their scales are simply painted on plastic with white and sometimes red paint. This reduces the ability to see instrument readings in the dark. Also, this appearance has no attractiveness. Therefore, many drivers replace dashboards.

Panel or torpedo?

Which torpedo is suitable for the VAZ 2107? The issue is complex, but completely solvable. Just to begin with, you should determine how radical the alterations will need to be made. Such tuning can be done in two ways:

• Replacing the dashboard;
• Replacement of the entire torpedo.

The first option will allow you to get by with little expense and replace the panel with another one that suits you more. You just have to adjust the socket a little in size. It is somewhat more difficult to install a new panel. At the same time, it must be suitable in size and provide the ability to connect all vehicle systems. The final choice depends on your ultimate goals and capabilities.

Dashboard

Let's start with the simplest tuning option. A donor will have to be found for a replacement. The simplest option would be to install a panel from a VAZ 2110. There will be a minimum of problems with this work, and the resulting design will look much more advantageous. You will have almost no problems connecting wires. Here they are almost identical. All main devices are also connected in the same way. Tools you will need are a soldering iron and scissors. To make the devices work better, you need to install fluid reservoirs from 2110 under the hood.

Another equally common option is to install a dashboard from a GAZ 3110

. It also looks much better. The installation itself is practically no different from similar work with a panel from a VAZ 2110; it can also be adjusted to size using a soldering iron and scissors. But here you will have to tinker with connecting devices.

For example, you purchase a tee from a “six”, and use it to connect an econometer and an oil pressure sensor. It is recommended to install a speed measurement sensor used in the tenth family of VAZs.

These are the easiest panels to install. But you can use this part from other foreign cars. Just be sure to take into account the compliance of the VAZ 2107 devices with the chosen foreign car. The easiest way is to find a similar set of sensor readings displayed on the panel in foreign-made cars produced in the late 80s and early 90s.

Changing the torpedo

Some drivers are not satisfied with the appearance of the torpedo on the VAZ 2107. Sometimes this element from the “five” may be installed on the car. In this case, a purely practical inconvenience is added to the unpleasant appearance. You have to close the glove compartment with a universal “lock”, or rather, seal it with tape. Otherwise it will constantly open. Therefore, you can change the torpedo.

Of our models, the best fit is a spare part from a VAZ 2115. You just have to use polyurethane foam to seal small non-joints. Of the foreign cars, the best fit here is a torpedo from a BMW E30

. She will look much more advantageous.

There is another option, install a torpedo from a Toyota Camry

.

It is slightly wider than the standard part. Therefore, for a more accurate installation, you will have to trim the torpedo a little from the bottom on the sides. But even in this case, it will interfere with the window regulators. So get ready to install electric lifts right away. This will be the best option. You will also have to struggle with installing the steering wheel cover.

The standard cover will not fit into the steering wheel opening on the BMW dashboard. Therefore, craftsmen usually perform adjustments. Some people cut the panel, but it is much easier to cut off the excess from the casing. It is better to use standard mounts from the original torpedo, only they are slightly bent. Often the torpedo can sag downwards, so it is advisable to immediately provide support.

Main characteristics of the VAZ 2107 torpedo

Before you find out which machine you can install the panel from, you should take into account the location and characteristics of the elements that make up the original design. The left part of the VAZ 2107 torpedo consists of the following elements.

1. Engine efficiency sensor, where the red sector indicates uneconomical mode, and the green sector indicates optimal engine performance.
2. Coolant temperature sensor, where the white sector is associated with a cold engine, and the green sector with the operating mode. If the engine boils, the red sector will light up.
3. Tachometer responsible for the crankshaft speed.

On the right side of the native instrument panel there are:

• speedometer - shows the speed of the vehicle, while the counter at the bottom shows the total mileage of the car, and the top one is responsible for the local mileage (if necessary, the data is reset);
• fuel sensor - presented in the form of a warning light that lights up when there is less than 5 liters of gasoline in the tank;
• battery charge sensor, where the red sector indicates that the battery is discharged, green - normal, yellow - the power supply is being recharged.

It is impossible to determine which element of the above is the most important. Each unit plays its role in the safe movement of the vehicle. It should be noted that between the right and left parts of the original VAZ 2107 panel there are a direction indicator and a set of light bulbs.

1. Informs about the opening of the air damper.
2. Indicating that there is no battery charge.
3. Dimensional.
4. High beam.
5. Informs about lack of oil pressure.
6. Notifying when the parking brake is used.

Return to contents

Designations

The VAZ-2107 torpedo is an important component of the entire structure. The dashboard layout looks like this:

1. Vehicle voltmeter.
2. Speedometer indicating travel speed.
3. Odometer (meter of kilometers traveled by the car).
4. A meter indicating the crankshaft rotation speed. Its technical name is tachometer. The screen has several zones painted in different colors. The yellow section is the engine running at high speeds, the red part is unacceptable modes. The maximum speed of this machine is 6 thousand rotations per minute.
5. Refrigerant temperature indicator. If the arrow is in the green zone, this is normal. Overheating of the power unit is accompanied by a mark in the red part of the indicator. If the coolant temperature exceeds 118 degrees Celsius, it is strictly not recommended to operate the vehicle.
6. Indicator of economical engine operation (econometer). Its arrow should be in the green zone.
7. Vehicle warning lamp assembly.
8. Activation of repeated signals (turns).

Choosing the right dashboard

VAZ 2107 car owners are thinking about which dashboard fits their car best. Before you make a choice, you should figure out how to remove the original panel. To begin with, it is recommended to remove the plastic decorative handles from the control levers. Then the handle is removed from the mileage reset button. On the right side of these levers, the decorative plug is removed.

Using a Phillips screwdriver, remove the self-tapping screw that holds the VAZ 2107 torpedo. The next step is to disconnect the speedometer drive cable from it. To do this, unscrew the knurled nut. Next, the vacuum supply hose and the bags with wires, which are initially marked, are disconnected.

If necessary, repair work is carried out, including replacing the light bulbs of the main devices. The procedure is carried out by scrolling the cartridge counterclockwise. Dismantling work involves unscrewing the nut securing the holders to the torpedo body.

Dismantling the old torpedo

If we talk about which car the panel fits the VAZ 2107 from, then auto mechanics recommend installing a torpedo from a BMW or Volga 3110. Often, “Seven” car owners prefer the second option. The main task in this case is to install the oval panel into a square one. A BMW torpedo, unlike its domestic counterpart, does not require the installation of additional plastic.

Installation involves the use of a soldering iron, scissors, and a gas stove. For better functioning, tanks from an engine chisel are installed under the hood of the new torpedo. When deciding which panel is best suited for the VAZ 2107, you need to take into account that the dashboard from the 3110 car model has a different shape. To install it, the corners are removed and additional work is carried out to adjust this structure.

Additional indicators

The VAZ-2107 torpedo, the photo of which is presented above, has several more important indicators, namely:

• High beam headlight activation sensors. At the same time, the lamp lights up blue.
• Oil pressure controller. If this indicator is sufficient, when the engine is turned on, the indicator glows red and immediately goes out. A long glow of the light indicates low oil pressure. Ignoring this problem can lead to failure of the vehicle's power plant.
• Parking brake control mode (its activation is indicated by the corresponding lamp, which lights up red after the engine starts).
• Indicator of kilometers traveled per day.
• Fuel remaining sensor. If there are about 5 liters of fuel left in the tank, it lights up yellow.
• The main indicator of gasoline level.

Installation highlights

Before deciding which panel you can install, you should take into account that the original VAZ 2107 torpedo can be returned at any time. If such a procedure is carried out independently, it is recommended to use a book on repairing classics. It will take a lot of time to complete the work.

When connecting the wires, you need to remember that one goes to ground, and the second goes to the panel to the corresponding contact. It is recommended to label which connector goes where. To operate the speedometer, a speed sensor from model 2110 with 6 pulses is installed. If the “seven” is equipped with an econometer, it is recommended to install a tee from 2106 on 2 sensors, including a pressure sensor from engine 402.

The panel from the BVM is also suitable for the VAZ 2107 torpedo. But not all car enthusiasts know which model. It is recommended to use a BMW E30 torpedo with some modifications. You will need to install front electric windows. This is due to the fact that with this panel the handles will interfere with closing the doors. Since the gear knob in the standard position is not suitable for use with this torpedo, you will have to bend the gear lever. The stove also requires some changes.

Auto mechanics know everything about the specifics of the work ahead. For example, the torpedo from this BMW model is slightly wider, but when installing it there is no need to make major changes.

The advantages of the new panel include:

• larger parameters - the length of the hood has increased by 10 cm,
• the height of the car increased by 5 cm,
• about 20 liters added. pp., of which 5 l. With. within 2 days it takes new caps on the disks.

Particular attention should be paid to fastening. Small screws are used for this. The nuances of the work also include installing the steering column cover - it will need to be trimmed. Some VAZ 2107 car owners trim the dashboard itself, but adjusting the casing to the required dimensions is much easier. This must be done carefully.

The VAZ 2107 dashboard does not light up: reasons

If the device on the seven stops activating, check the components.

1. Corresponding fuse. The insert often burns out due to moisture or power surges in the on-board network.
2. Next, the wiring is checked. Some pins may not fit well or touch adjacent terminals, causing shorts and shorts.

Tidy 2107 does not work

If, when you turn on the ignition when the car is cold, the car does not start and the shield does not respond, check the above points and additionally inspect the ignition switch cylinder. Usually in this place the contact burns out or the connections oxidize, which causes loss of ignition.

Highlight the mass damage. Wires may oxidize, resulting in loss of contact.

2107: the tidy does not light up, the starter turns

When the shield goes out or the light is dim, check the operation of the external lamps and the illumination of the car interior. When everything is in order, remove the device and check the contact groups of the module.

VAZ 2107: temperature sensor on the dashboard does not work

The element fails only in two cases.

1. The sensor has failed.
2. Module wiring is damaged.