Lada Vesta on-board computer and its settings

November 27, 2015 Lada.Online 114 386 32
The Vesta instrument cluster has a built-in trip computer (MK), which has a number of useful functions that are not found in the on-board computers (BC) of many cars (including those of competitors). For example, you can find out the voltage of the on-board network or the speed limiter. Read the instructions for using the bookmaker.

Setting the clock on the Lada Vesta on-board computer

In order to enter the clock setting mode, you need to use the top button of the on-board computer (), by long pressing this key you will get to the mode you need, how can you determine that you are already there? This is very simple, if you are on the right track, then the on-board computer should leave on its display only the numbers responsible for the current time, and one of these numbers (the first from the left) will flicker continuously. Each time digit is adjusted separately and does not depend on each other; in order to adjust the first digit, use the on-board computer buttons (,↓) with short presses. As soon as you set the first digit, move on to the next one; this can be done by long pressing the top button of the on-board computer (). Do these steps with each digit, then leave the time setting mode.

Let's sum it up

According to reviews from many owners, the on-board computer is a convenient and useful device designed to provide information support to the driver, especially if you know how to set everything up correctly. If your Lada Vesta does not yet have this electronic module, we recommend that you consider purchasing and installing it.

In this article, we asked the wizard to answer the question: “How to set the clock on the dashboard of a Lada Vesta?”, as well as give useful recommendations on the topic. Read on to find out what came of it.

Hi all ! I noticed a strange operation of the clock, for those who have been using the car for a long time, tell me, is this normal? Or something with the instrument panel?

Direct time setting

The time is set according to this scheme.

You need to enter edit mode . To do this, you need to press and hold the “up” arrow for about three seconds. At this moment, only the numbers “0.0 km” in the second line from the left of the display will start flashing on the screen. While in edit mode, you need to press the same arrow once. The clock indicator on the screen will blink, for example, “08:35”.

You will need to hold down the top key again for a few seconds to start changing the clock.

Only the first digit “0” from “08:35” will begin to pulsate. Now you can use the arrows to change the readings of tens, of which we only have two. To go to the hour units, hold down the “up” button again for a couple of seconds, after which “8” will begin to pulsate. Using the joystick we set the numbers we need from “0” to “9”.

Secret settings of LADA VESTA

The standard BC and display reflecting the necessary information turn on simultaneously with turning the ignition key. The computer is controlled and configured using two buttons located at the end of the switch to the right of the steering wheel (Fig. 1). By pressing the buttons simultaneously, you can adjust the time, route mileage, reset the readings, and perform other actions.

To set the clock, you need to press the top key and hold it for a while. By briefly pressing, you can scroll through the menu, selecting the desired options, and update the readings. The first section shows the total mileage along the route, the second shows the time (hours and minutes), the third tells you which gear to switch to, and so on, in accordance with the list above. You can exit the menu at any time by pressing the bottom key.

There is also a secret menu in the bookmaker, which is not in the manual. You can get into it by pressing both buttons. In these options, you can change the level and tone of the turn signal or hazard warning signal: to increase the sound, you need to press the upper button, to decrease it, press the lower button. When you hold down both keys on the SET inscription, the settings will return to their normal position.

... not described in the manual, allow you to adjust the tone and volume of the turn signals and hazard warning lights. This menu is a service menu and, according to AvtoVAZ’s plans, should not be available to a wide range of users, since, unknowingly, the sound of the turn signal repeaters may be turned off, which will be mistaken for a malfunction.

Hidden settings, not described in the manual, allow you to adjust the tone and volume of the turn signals and hazard warning lights.

To enter the hidden settings menu, press and hold simultaneously both on-board computer control buttons for about 5 seconds, located on the windshield wiper control lever (to the right of the steering wheel).

Steering column switch (to the right of the steering column)

Sound P1 will appear on the display of the bot computer.

P1 – signal tone for turning on the direction indicators.

d1 – volume of the turn signal signal.

P2 – signal tone for turning off the direction indicators.

d2 – volume of the turn signal off signal.

After making the settings, you must press and hold again for about 5 seconds until you go to the standard on-board computer screens. The entered settings will be automatically accepted.

It is recommended to turn on the hazard lights so you can hear the sound when setting up.

Description of functions

A review of the Lada Vesta on-board computer shows which parameters are displayed on the display or front panel display. This makes the life of a Lada car enthusiast much easier. On Vesta, the standard on-board computer shows the following information, in addition to error codes:

The magnitude of the vehicle network voltage;
Cruising range on fuel in the gas tank;
Current and average fuel consumption;
Remaining fuel in the tank;
Travel time along a specific route;
Average speed;
Watch;
Total mileage;
Controls the outside air temperature;
Gives gear shift hints (with or without sound);
On a Lada with cruise control, information about the installed parameters is displayed;
If there is an AMT, the gear engaged or the auto - manual mode is displayed.

On-board computer Lada Vesta The on-board computer on the Lada Vesta is configured using two keys on the right steering column switch. Using the keys, entering the menu, you can control the readings of Vesta BC, displaying the necessary data on the control panel. Thus, the driver constantly has the opportunity to control the required parameters of Vesta.

Options for replacing the standard BC

There are many models from different manufacturers on the car computer market. Unfortunately, most of them cannot be used for Lada Vesta due to incompatibility. But there are BC models that are adapted to various AvtoVAZ models and have proven themselves well. Such brands include Multitronics. The company produces on-board computers for a wide range of cars, with advanced diagnostic functions, navigation, audio and TV systems.

The models produced have various mounting options, and at the owner’s request they can be placed on a dashboard or secured in other convenient places. Below are Multitronics BC models with different types of mounting.

Multitronics VC730

Multitronics TC 750

In addition to the above functions of a standard computer, Multitronics has very useful additional ones:

Displays information about vehicle malfunctions, errors, their codes, and also duplicates this message in voice mode. Sends a voice notification to the driver about the need to refuel the car. Conducts quality control of the filled fuel and displays an alert on the screen. Reminds the driver to turn off the lights or low beams. It is a full-fledged navigator. Allows you to use multi-channel television. Automatically maintains the set temperature in the cabin. The Multitronics on-board computer has a fairly large convenient screen, simple controls and a user-friendly interface. For owners of domestic cars and, first of all, for owners of various modifications of the Lada, a special model “Multitronics Comfort” has been developed.

Along with the BC models presented above, there is also computer equipment of the domestic brand "STAT" (Tolyatti), widely used on AvtoVAZ models. All of the company's products are adapted for installation on domestic cars, primarily Lada. The SHTAT brand BC has a backlit liquid crystal display and a convenient mount on the car dashboard. Below is a model of an onboarder from this company.

What does the model look like?

Connection of on-board computers is carried out by connecting the standard cable of the electronic control unit (ECU) to the OBD-II diagnostic connector in accordance with the instructions. After successfully installing the BC and connecting it to the ECU, you need to configure the onborder.

To do this, you need to start the engine and select a “custom” mode from the two offered on the display so that the type of ECU unit is automatically detected. To read sensor readings, you need to set “automatic selection” in the menu, and the computer will begin to receive information about all components of the car. Diagnostics will be carried out in accordance with the protocol corresponding to the machine model. The next stage is entering data into the BC that allows the computer to fulfill its functional purpose: the desired temperature in the cabin, the route and other parameters according to requests that will be displayed on the screen.

Main functions and capabilities of the Lada Vesta head unit

Firstly, the radio tape recorder 100% fulfills its purpose - it plays music files and radio. Music can be listened to via AUX, SD card or via USB devices that can be connected as a file drive. You can also connect the radio via Bluetooth to your phone and play music on your car speakers.

Secondly, the radio displays the time on a monochrome display.

Thirdly, it has a Hands free function.

As you can see, the radio has all the necessary functions for comfortable listening to sound.

Radio Receiver Capabilities

Modes:

“Radio” mode (manual and automatic search for radio stations)
“Audio” mode (listening to audio files from an SD card, USB flash drive or phone via bluetooth)
AUX mode (To play audio from an external source)
Hands-free Bluetooth mode

Setting up audio parameters (short press on encoder No. 7 in the main menu):

Switching and changing the radio settings is carried out by rotating the encoder (position 7) in the following order: Equalizer, Bass tone, Treble tone, Balance, Front/rear balance, Loudness, Output.
There is an equalizer, the settings of which are carried out in the following order: EQ JAZZ, EQ POP, EQ CLASSICAL, EQ VOCAL, EQ USER.

System settings (long press of encoder No. 7 in the main menu) allow you to:

set the time display format (Clock mode);
manually set the current time (Setting hours/minutes);
on off. function of adjusting the current time using RDS signals (RDS CT);
on off. function of automatic switching to an alternative broadcasting frequency (RDS AF);
on off. search function for radio stations by a given program type (RDS PTY);
on off. function for receiving regional radio stations (RDS REG);
on off. CB band (AM band);
on off. Bluetooth function (phone connection);
on off. button press confirmation signal (signal);
on off. noise reduction function (noise reduction). Affects only operation in “Radio” mode;
reset the radio settings to factory settings (factory settings). After resetting, the radio settings are set in accordance with Table 2 (clause 1.2 “Description of controls”).

Cost of maintenance of Lada Vesta in 2021

The price for LADA Vesta maintenance may vary among dealers in different regions. It is also different for individual trim levels of the base model.

Lada Vesta in the showroom. Photo source: https://zen.yandex.ru/media/ladaonline/chto-luchshe-bazovaia-lada-vesta-ili-lada-granta-liuks-5cb312b568a9c800b4381c37

Average prices for 2021 in Moscow and the Moscow region (work only, without the cost of replacement consumables, in rubles) for Vesta sedan, station wagon, SV Cross models:

TO-1 – 6600;
TO-2 – 8800;
TO-3 – 6600;
TO-4 – 8800;
TO-5 – 6600;
TO-6 – 17700.

The same for the Vesta Sport model:

TO-1 – 7100;
TO-2 – 9200;
TO-3 – 7100;
TO-4 – 9200;
TO-5 – 7100;
TO-6 – 18200.

The cost of maintenance for a Lada Vesta from an official dealer is still less than that of its classmates produced in Russia. You can compare the cost of maintenance of 1 Lada Vesta with its analogues.

Setting up and operating a car computer

Maintenance regulations for Lada Vesta: features

Each car owner operates his car at his own individual rhythm, so it is impossible to determine a single annual mileage rate for all drivers. AvtoVAZ has set the frequency of maintenance of its cars in such a way as to take into account the interests of both those who spend most of their lives behind the wheel and those who get into the car a couple of times a week.

Maintenance of Lada Vesta. Photo source: https://www.drive2.ru/l/539417107125764692/

Therefore, the moment when it is time to go to the service for the next maintenance of the Lada Vesta was established in two ways:

every 15 thousand kilometers;
no later than 12 months after the previous repair.

You need to base it on what happens first.

Description of the computer Staff UniComp Vesta XD

The on-board computer State UniComp Vesta XD is intended for installation exclusively on Lada Vesta cars.

It connects to the OBD 2 block and, unlike the State UniComp-400MK, has advanced diagnostics of all vehicle systems, as well as transferring fuel readings in the tank to the computer display directly from the controller, which greatly simplifies connecting the computer (no need to additionally connect wiring as on the State 400MK ).

The on-board computer can be installed both on the windshield and on the instrument panel. Its design ensures ease of use when operating the car.

This trip computer has a liquid crystal display with anti-glare coating. UniComp Vesta XD staff has an audible emergency warning function.

The computer is equipped with non-volatile memory. This means that when the terminal is removed from the battery, the BC retains all values.

"PLASMER" function

This is plasma heating of candles. The effect is achieved by applying high-voltage pulses with a frequency of 150 Hz and an energy of 0.04 J to the electrodes of the spark plugs. During the exposure time, energy of about 60 J is released on each spark plug. In this case, the air in the cylinders is ionized, the electrodes of the spark plugs and their insulators are heated. After such preparation, the probability of failure to start the engine in severe frost or high humidity conditions, as well as in the event of unacceptable filling of spark plug electrodes with gasoline, is reduced several times.

"FAST AND THE FURIOUS" function

This is resetting (cleaning) the controller's memory to factory settings. This function erases not only error information, as was the case in previous versions of the On-Board Computer, but also removes the cause of the error, thereby resuscitating (correcting) the vehicle's electronic control unit. New automobile controllers, such as BOSCH MP7.0, BOSCH M7.9.7, JANUARY 7.2, have an operating algorithm based on comparing a mathematical model of the engine with real parameters. All deviations from the mathematical model are recorded in the controller’s special memory and taken into account in further work - this is the so-called self-learning of the controller. If the car is operated for a long time in an “unusual” mode, this can lead to undesirable consequences in the future. The engine may operate unstably, gain speed poorly, and experience detonation overloads more often. This happens, for example, when operating on low-quality gasoline; in monotonous mode (mainly at low or high engine speeds); in high load mode, etc. Most often this happens when changing the type of fuel from gasoline to gas or vice versa.

TROPIC function

This turns on the cooling system fan based on the engine temperature you set. This function is especially useful in the summer in hot weather, when the car is stuck in a traffic jam in the city, because... will help avoid engine overheating.

Computer installation

You can install the UniComp Vesta XD yourself; all the necessary wires are included in the kit. The connection sequence is described in detail in the operating instructions.

The BC has a built-in sound buzzer, as well as a USB connector for connecting to a PC to replace the firmware.

Deactivating daytime running lights

Daytime running lights on the Lada Vesta turn on automatically - you just need to turn the ignition switch to two extreme positions. DRLs were invented in order to increase traffic safety on the road, but we must admit that even, for example, at night they shine quite brightly and are sometimes completely inappropriate.

An example of this is an alarm system with auto start. If the owner activates this mode, then at night those around him will already know that the car’s engine is running - this increases the risk of vandalism or even theft. Therefore, some owners of domestic compact cars decided to turn off the DRLs.

This is done very simply. You just need to set the steering column lever to an intermediate position between 0 and the “dimensions” label. That's it, daytime running lights will not work for us when the ignition is activated.

Did you like the article? Subscribe to the channel to stay up to date with the most interesting materials

Possible errors and methods for correcting them

During the operation of the vehicle, various malfunctions may occur. Information about breakdowns is displayed on the on-board computer screen in the form of digital error codes. The most common of them are: engine overheating, 0217; fuel pump does not work, 0230; incorrect ignition operation, 0301; ignition coil faulty, 0351; tachometer faulty, 0654; bad road, 1617. In addition to malfunctions in the operation of individual vehicle components, errors may also occur in the BC itself. This is easy to check: if no information is displayed on the screen when the ignition is turned on, you should check the connector connecting the computer to the computer. Obviously incorrect information is displayed on the screen when the protocol fails. To correct the situation, you need to reboot the BC, select the protocol corresponding to the characteristics of the car in the menu and install it. In case of more serious damage, you must contact the warranty workshop. It should be borne in mind that when storing the car outdoors for a long time, especially in severe frost, it is necessary to remove the on-board computer. Also, you must not allow water to enter the BC unit or operate it with faulty electrical equipment.

The on-board computer greatly simplifies the operation of the car, helps the driver navigate difficult situations, warning about dangers and malfunctions. The information displayed on the device screen is essentially a vehicle logbook, the analysis of which allows the driver to make the necessary decisions.

Installing standard BCs on the Lada Vesta is significant progress, as they greatly facilitate management and minimize operating costs. In addition to its undeniable advantages, the standard device also has a number of disadvantages that can be easily eliminated by installing an additional on-board computer.

New Bortovik on Kalina

Garage taps. Peculiarities

Why do you need an on-board computer?

How to decipher and correct Opel Zafira errors

Author. Specialist in car and auto electronics repair. For more than 15 years I have specialized in the installation and configuration of on-board computers, parking sensors and other electronics.

Lada Vesta time setting on the instrument panel